Contents 1 important safety instructions Hearing safety General information 2 Your True wireless earpieces What's in the box Other devices Overview of your True wireless earpieces 3 Get started Charge the battery How to wear Pair the earpieces with your Bluetooth device for the first time Pair the earpieces with another Bluetooth device 8 MAU se Www NNN 4 Use your earpieces Connect the earpieces (o your Bluetooth device Control ANC {Active Noise Cancellation) Power on/off Manage your calls and music Voice A
1 Important safety instructions Hearing safety 4] Danger + To avoid hearing damage, Emit the time you use headphones at bi volume and set the volume to a safe level The inured the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphones. + Listen at reasonable volumes for reasonable periods of time. « Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your True wireless earpieces Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at With these Philips True wireless earpieces you Can: Enjoy convenient wireless hands free calls + Enjoy and control music tirelessly Switch between calls and music What's in the box Philips True wireless earpieces Philips T1 OOO Comply™ Foam Tips x 3 pairs Replaceable sar tip covers x 6 pairs USB-{ charging cable {for charging only} Quick sta
Overview of your True wireless earpieces {D LED indicator (earpieces) (@ Multi-function touch (3) LED indicator (BT pairing and factory reef) @ Bluetooth pair button (5) LED indicator (battery state or charging state) ® USB-C charging slot 4 EN
3 Get started Charge the battery * Before you use your headphones, place therm in the charging bow and charge the battery for 2 hours for optimum battery capacity and Lifetime. = Use only the original USB-C charging cable to avoid any damage. © Finish your call before charging. Connecting the beanpoles to charge will power them off.
How to wear Select suitable ear tps for optimum fit Tight, secure fit will provide the best sound quality and noise-cancellation, 1 Test which ear tip provides you with the best sound and wearing comfort, 3 sizes of Comply™ foam ear tip covers and 5 other sizes of replaceable ear tip covers are provided: extra large, large, medium, small and extra small. 00 Comply™ foam L Mx2 § Insert the earpieces 1 2 Check left or right orientation of the earplugs.
Tha following example shows you how to pale the earpieces with your Bluetooth device. 1 Tum on the Bluetooth function of your Bluetooth device, select Philips T1. 2 Hemmer earpieces’ password {4 zeroes) if prompted. For those devices featuring Bluetooth 3.0 or higher, there is no need to enter a password, o Oy Philips T Single earpiece (Mono mods) Take either right or left earpiece out farm charging box for Mono use. The earpiece will power on automatically.
4 Use your earpieces Connect the earpieces to your Bluetooth device 1 Turn on the Bluetooth function of your Bluetooth device. 2 Open the charging bom cover. ¥ The blue LED flashes. w» The earpieces will search the last connected Bluetooth device and reconnect to it automatically. If the last connected one is not available, the earpieces will search and reconnect to the second last connected device.
Power on/off Voice Assistant Task Tur the earpieces wn Turn the earpieces off Malfunction touch Operation Take earpieces out of the IED; bots c power on Put earpieces back into the charging box to power off Manage your calls and music Music control, Task Play or Pe mus Mex track volume +f Call control Task Multi Operation function touch Right Tap and hold earpiece for { second Right Triple tap earpiece control Mul function touch Operation Bik ny Switch caller ‘Hang us call Reject call Double tan Right Barca
Earpieces LED indicator Charging box LED status indicator status Earpieces status Indicator When charging Indicator The participles are White LES blinks Battery low Amber LED Height connected io a foundry § seconds up Bluprethdeies,, Relative adequate White LED lights The earpieces are The LED flashes battery up ready for pairing blue and white alternately The temples are White LED blinks on but not ovary second connected to a {auto tum off fare Blusterous device 2 minutes) Low battery level Blue LED blinks
5 Reset the earpieces if yous encounter any pairing or connection issue, you can follow the following procedure to reset your earpieces to factory default value, 1 on your Bluetooth device, go to the Bluetooth menu and remove Philips T1 from the device st 2 Tum off the Bluetooth function of your Bluetooth device, 3 Re tum earpieces to charging box and open the lid. 4 Press button on box twice.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.pdc. philippic. Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components which can be recycled and reused.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields, Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging says to separate into three materials: cardboard (box), polystyrene foam (buffer} and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, inc. and any use of such marks by MMD Hong Kong Holding Limited is under license, Other trademarks and trade names are those of their respective owners. Sir Sir is a trademark of Apple Inc, registered in the U.S. and other countries, Google Google and Google Play are trademarks of Google LLC.
9 Frequently asked questions My Bluetooth earpieces do not Turn on. The battery level is low. Charge the earpieces. | cannot pair my Bluetooth earpieces with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth features on your Bluetooth device and turn on the Bluetooth device before you turn on the earpieces, Pat ring does not work. Put both earpieces Into charging box. Male sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
PHILIPS 2072 © MIND Hong Kong Holding Limited. All rights reserved. Specifications ans subject $o sangs without notice. Philips and the Philips Shield Emblem are registered trademarks of Kinkiness Philips MY. and are used under incense, This product has been manufactured by and is sold nudes the responsibility of MMD Hung Hong Holding Limited or he of fts affiliates, and MMD Hong Kong Holding Limited is the warrior in relation to this product.