Headphones 3000 Series TAA3206 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headphone 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 3 3 4 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old product and battery Remove the i
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your earpieces. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music.
Overview of your Bluetooth wireless headphone 1 2 4 5 3 6 Volume + Power button Volume LED indicator Microphone Type C charging slot
3 Get started Charge the battery Note Before you use your headphone for the first time, place the headphones in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphone, as connecting the headphone for charging will power the headphone off.
4 Use your headphone Manage your calls and music On/off Connect the headphone to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED is on 1s. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones will be in pairing mode.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Indicator The blue LED flashes for every 4 seconds Low battery level. The white LED flashes once for every 3 seconds until it is out of power. Battery is fully charged. White LED is off.
5 Technical data Music time: 10 hours Talk time: 10 hours Standby time: 55 hours Charging time: 2 hours Rechargeable lithium polymer battery (85 mAh) Bluetooth version: 5.0 Compatible Bluetooth profiles: • HFP (Hands-Free Profile-HFP) • A2DP (Advanced Audio Distribution Profile) • AVRCP (Audio Video Remote Control Profile) Supported audio codec: SBC Frequency range: 2.402-2.
6 Notice Declaration of conformity Remove the integrated battery Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
8 Frequently asked questions The audio quality is poor and crackling noise can be heard. • The Bluetooth device is out of range. Reduce the distance between your headphone and Bluetooth device, or remove obstacles between them. • Charge your headphone. My Bluetooth headphone does not turn on. The battery level is low. Charge the headphone. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_TAA3206_00_EN_V1.