Headphones 4000 Series TAA4216 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones 3 3 3 4 5 5 5 6 Connect the headphones to your Bluetooth device 6 Manage your calls and music 6 Clean and replace cushion 7 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your earpieces. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. With this Philips wireless headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Global Warranty Safety leaflet Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headphones Volume + (Power on / off / Pairing) Volume 3.
3 Get started Charge the battery Note Before you use your headphones for the first time, place the headphones in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off.
4 Use your headphones Manage your calls and music On/off Connect the headphones to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button for 2 seconds to turn heaphones on. The white LED will turn on . The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically.
Other headphones indicator status Call control Task Pick up/ hang up a call. Button Reject a call Hold current call and accept an incoming call Hold current call and reject an incoming call Cancel current call and accept an incoming call Switch between calls Operation Press once. Press and hold 2 s Press once Press and hold 2 s Press twice Press 3 times Low battery level. Battery is fully charged.
Take out the cooling ear cups in middle layer and rinse the Ear-cup cushion cover. Put the cooling ear cups back into the Ear-cup cushion cover. + = Insert the edge of the cushion into the notch on the headphone, then turn it clockwise. 5 Technical data headphones Music time: 35 hours Talk time: 35 hours Charging time: 2 hours Fast charging 15mins plays for 2H Rechargeable lithium polymer battery (350 mAh) Bluetooth version: 5.
6 Notice Declaration of conformity Remove the integrated battery Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respective owners.
8 Frequently asked questions My Bluetooth headphones does not turn on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphones. How to reset pairing. Reset headphones with holding 5sec on volume + and volume – button together while headphones has been turned on.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_TAA4216_00_EN_V1.
