Headphones 6000 Series TAA6606 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing safety General information 2 2 2 Your Bluetooth headphones 4 What's in the box Other devices Overview of your Bluetooth wireless headphones 4 4 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 5 Technical data 6 Notice Declaration of conformity Disposal of your old product and battery Remove the integrated battery Compliance w
1 Important safety instructions Hearing safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months. To avoid risk of fire, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W). Operating and storage temperatures and humidity • Store in a place where the temperature is between -20°C (-4°F) and 50°C (122 °F) with up to 90% relative humidity.
2 Your Bluetooth headphones Type-C charging cable (for charging only) Headphones Series CTN Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support.
Overview of your Bluetooth wireless headphones 1 2 3 4 5 6 7 8 1 Running light 2 Volume - 3 Volume + 4 Power button 5 Type C charging slot 6 Microphone 7 LED indicator 8 Multi-function button (MFB) EN 5
3 Get started Charge the battery Note Before you use your headphones, place them in the charging box and charge the battery for two hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging. Connecting the headphones to charge will power them off. Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the first time, pair it with a mobile phone.
4 Use your headphones Manage your calls and music On/off Connect the headphones to your Bluetooth device 1 Turn on your mobile phone/ Bluetooth device. 2 Press and hold the on/off button to turn the headphones on. The blue LED is on 1 second The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically.
Running light Task Button Operation Running light on Press once Slow blinking--> Fast blinking --> Constant On --> Constant Off Press once Other headphones indicator status Headphones status Indicator The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music The headphones are ready for pairing The blue LED flashes once for every 4 seconds The headphones are on but not connected to a Bluetooth device The blue LED flashes twice fo
5 Technical data Music time: 9 hours Talk time: 8 hours Standby time: 80 hours Charging time: 2 hours Rechargeable lithium polymer battery (155 mAh) Bluetooth version: 5.2 Compatible Bluetooth profiles: • HFP (Hands-Free Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (Audio Video Remote Control Profile) Supported audio codecs: SBC Frequency range: 2.402-2.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
8 Frequently asked questions The audio quality is poor and crackling noise can be heard. • The Bluetooth device is out of range. Reduce the distance between your headphones and Bluetooth device, or remove obstacles between them. • Charge your headphones. My Bluetooth headphones do not turn on. The battery level is low. Charge the headphones. The audio quality is poor when streaming from a mobile phone, is very slow or streaming does not work at all.
Clean your headphones regularly. • Use a clean, damp cloth to clean your headphones - especially the sound conduits and the microphone holes - regularly and avoid buildup of substances such as sweat or earwax. • If any sweat or water droplets are left in the sound conduits, air holes or microphone holes, the sound level will temporarily drop or cut out entirely. This is not a malfunction. Use a soft, damp cloth to dry the headphones thoroughly.
2023©MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
