Sports Headphones 7000 Series TAA7507 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 2 Your True wireless earpieces 4 Hearing safety General information 2 2 What's in the box Other devices Overview of your True wireless earpieces 4 4 5 3 Get started 6 4 Use your earpieces 9 Charge the battery How to wear App download Pair for the �rst time Pair with another Bluetooth device Connect to your Bluetooth device Control ANC (Active Noise Cancelation) Power on/off Manage your calls and music Voice Assistant Earpieces LED indicator status Charg
1 Important safety instructions Hearing safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
To avoid risk of �re, the equipment is supplied only by external power source which output shall comply with PS1 (with output capacity less than 15W). Operating and storage temperatures and humidity • Store in a place where the temperature is between -20°C (-4°F) and 50°C (122 °F) with up to 90% relative humidity. • Operate in a place where the temperature is between 0°C (32°F) and 45°C (113 °F) with up to 90% relative humidity. • Battery life may be shorter in high or low temperature conditions.
2 Your True wireless earpieces Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support.
Overview of your True wireless earpieces 1 2 3 4 5 6 1 LED indicator (earpieces) 2 Multi-function touch (MFT) 3 Bluetooth pair button 4 LED indicator (BT pairing and factory reset) 5 LED indicator (battery state or charging state) 6 USB-C charging slot 5 EN
3 Get started Charge the battery Note Earpieces Place the earpieces in the charging box. • • The earpieces start charging and the blue LED light goes on When the earpieces are fully charged, the blue light will go off Before you use your headphones, place them in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB-C charging cable to avoid any damage. Finish your call before charging.
How to wear App download Select suitable ear tips for optimum �t Scan the QR code/press 'Download' button or search 'Philips Headphones' in Apple App Store or Google Play to download the app. A tight, secure �t will provide the best sound quality and noise-cancellation. 1 2 Test which ear tips and stabilizers provides you with the best sound and wearing comfort. 3 sizes of silicone ear tips and stabilizers are provided : large, medium, small.
3 4 Turn on the Bluetooth function of your Bluetooth device. Pair the earpieces with your Bluetooth device, refer to the user manual of your Bluetooth device. Note After powering on, if the earpieces cannot �nd any previously connected Bluetooth device, it will automatically switch to pairing mode.
4 Use your earpieces Connect the earpieces to your Bluetooth device 1 2 Turn on the Bluetooth function of your Bluetooth device. Open the charging box cover. The blue LED �ashes. The earpieces will search the last connected Bluetooth device and reconnect to it automatically. If the last connected one is not available, the earpieces will search and reconnect to the second last connected device.
Voice Assistant Power on/off Task MFT Operation Turn the earpieces on Take earpieces out of the charging box to power on Turn the earpieces off Put earpieces back into the charging box to power off Manage your calls and music Music control Task MFT Operation Play or pause music Next track Right earpiece Right earpiece Tap and hold 1 second Triple tap Adjust volume +/- Via mobile phone control Call control Task MFT Operation Pick up/ Switch caller during a call Right earpiece Double tap Ri
Charging box LED indicator status When charging Indicator Battery low Amber LED lights up Relative adequate battery White LED lights up In use and cover is open Indicator Battery low Amber slowly blinks for 4 cycles Relatively adequate battery Off 11 EN
5 Reset the earpieces If you encounter any pairing or connection issue, you can follow the following procedure to reset your earpieces to factory default settings. 1 On your Bluetooth device, go to the Bluetooth menu and remove Philips TAA7507 from the device list. 2 Turn off the Bluetooth function of your Bluetooth device. 3 Return earpieces to charging box and open the lid. 4 Press button on box twice. 5 Follow steps in “Use your earpiecesconnect the earpieces to your Bluetooth device.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can �nd the Declaration of Conformity on www.p4c.philips.com. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing of the earpieces.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic �elds. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and Google Play are trademarks of Google LLC.
9 Frequently asked questions My Bluetooth earpieces do not turn on. The battery level is low. Charge the earpieces. I cannot pair my Bluetooth earpieces with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earpieces. Pairing does not work. • Put both earpieces into charging box. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
Charge your headphones regularly. If the headset is not used for a long time, the rechargeable battery will begin to lose its charge. To avoid this loss, please fully charge the battery at least once every three months.
22 © MMD Hong Kong Holding Limited. All rights reserved. Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
