TAE1205 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 3 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls andmusic 3 4 4 4 5 5 5 5 Technical data 7 6 Notice 8 Notice of compliance 8 Disposal of your old product and battery 8 Trademarks 9
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level.The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards asyour hearing adapts.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music. Other devices A mobile phone or device (e.g.
3 Get started Charge your headphones Note Before you use your headphones for the first time, charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. Connect the supplied USB charging cable to the charging slot on the headphones and the charger/USB port of a computer.
4 Use your headphones Connect the headphones to a Bluetooth device Turn on your mobile phone. Press and hold (>2s) the on/off button to turn the headphones on. The headphones are reconnected to the last connected device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device. Tip • If you turn on the mobile phone or activate the Bluetooth feature after turning on the headphones, you have to reconnect the headphones and mobile phone manually.
Summary of LED indicator 6 Headphones status Indicator The headphones are connected to a mobile phone. The blue LED flashes for every 5 seconds. The headphones are disconnected to a mobile phone. The blue LED flashes for every 10 seconds. The headphones are ready for pairing. The LED flashes blue and white alternatively. Low battery level. White LED double flashes Trigger once in 60 seconds. Charging. The white LED turns on until battery is fully charged.
5 Technical data • • • • • • • • • • • • • • Music time: 7 hours Talk time: 5 hours Standby time: 60 hours Normal time for a full charge: 2 hours Battery: Rechargeable lithium polymer battery (100 mAh) Bluetooth version: Bluetooth 5.0 Bluetooth profile: HSP, HFP, A2DP, AVRCP Operating range: Up to 10 meters (33 feet) Speaker driver: 8.6mm Frequency response: 20 – 20kHz Impedance: 32 ohm Sensitivity: 108.
6 Notice Notice of compliance Notice for US The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may causeundesired operation. FCC rules This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to part 15 of the FCC Rules.
Disposal of your old product and battery This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle. philips.com. This product contains non-removable batteries: Do not incinerate. Batteries may explode if overheated. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. Follow the steps described in this user manual.
Esteequipamentonãotemdireitoàproteçãocontrainterferênciaprejudicialenãopode causarinterferênciaemsistemasdevidamenteautorizados. EsteprodutoestáhomologadopelaANATEL,deacordocomosprocedimentos regulamentadospelaResolução242/2000,eatendeaosrequisitostécnicasaplicados. Paramaioresinformações,consulteasitedaANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
