Fidelio Wireless Home Speaker FS1 User manual Register your product and get support at: www.philips.
Contents 1 Important 3 Safety 3 Help and support 3 2 Your wireless speaker 4 What’s in the box 4 Overview of the speaker 4 3 Get started 6 Plug in the power 6 Turn on and off 6 4 Connect 7 Connect to Wi-Fi (Wireless Operation) 7 Connect the soundbar to Philips Play-f i enabled TV 5 Lighting operation 11 Pairing with Ambilight TV 11 Follow Music 12 Mood Light mode 12 Adjust brightness 13 LED light Off 13 Overview 13 6 Play 2 10 14 Play from Bluetooth devices 14 Control
1 Important Safety Important safety instructions Make sure that the power supply voltage corresponds to the voltage on the back or the underside of the unit. The speaker shall not be exposed to dripping or splashing. Do not place any source of danger on the speaker (e.g. liquid �lled objects, lit candles). Make sure that there is enough free space around the speaker for ventilation. Please use the speaker safely in an environment with temperature between 0°C and 45°C.
2 Your wireless speaker 11 Back Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. 10 What’s in the box Check and identify the contents of your package: Speaker Power adaptor Power cable Quick start guide Safety sheet Worldwide warranty Overview of the speaker Indicate the status. Press and hold for 3 seconds to enter the pairing with Ambilight TV mode. Press to select the LED light mode.
Wi-Fi Setup button Trigger Wi-Fi setup for Play-Fi. Press and hold the button for 3 seconds to active the WPS mode. Press and hold the button for 8 seconds to active the AP mode. For service USB socket for speaker software upgrade only. No playback function. DC In Connect to the power supply. Press and hold to activate the pairing function or disconnect the existing paired Bluetooth device. Reset Press with a sharp object for 5 seconds to restore factory defaults. 10 Audio In Audio input socket (3.
3 Get started Note The speaker will turn off automatically after 15 minutes without user operations and music playback. Plug in the power The speaker is powered by DC input. Connect the adapter cable to the DC in port of the speaker and then into a mains socket. Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
4 Connect Connect to Wi-Fi (Wireless Operation) 3 Press and hold (Wi-Fi) button located at the back cabinet for 8 seconds to trigger the Wi-Fi connection 5 8 sec (For iOS and Android version) By connecting this unit and mobile phones, tablets (such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-� to control the soundbar to listen to audio �les.
5 Launch the Philips Sound app 8 After connection, this product may powered by DTS Play-�. Follow the instructions in the app to connect this product to your Wi-Fi network. 5 5 Philips Sound Philips Sound 5 Philips Sound Philips Sound Settings Settings perform a software update. Upgrade to the latest software Settings Philips Sound SETUP SETUP SETUP 6 ue setup.
3 After connection, you can change AirPlay setup Use AirPlay to set up the Wi-Fi connection of iOS device (iOS7 or later) and speaker. 1 names to choose from or create your the end of the name list. Otherwise, it follows the default name. home network (xxxxxx) → device name displays in around 5 seconds. Settings Settings WPS mode Settings Settings → Select the Play-Fi device in the Airplay set up.
Connect the speaker to Philips Play-fi enabled TV 1 Power up your DTS Play-fi TV connected to the internet. 2 Enter the Settings menu on TV. Surround sound Setup Follow the on-screen setup. TV sound is muted. 1 Setting > Sound > DTS Play-fi Front Speakers One 2 Two 1 TV The home theater speakers are now independent speakers.
5 Lighting operation You can set the built-in LED light of the speaker to follow the color of your Philips Ambilight TV. Alternatively, you can set the light to show a preset color style or you can switch the light off. Press the button repeatedly on the speaker to switch the light mode: 1. Work with Ambilight / Follow music (when no Ambilight TV linked or TV is disconnected), 2. Mood light, 3. Off.
Follow Music Mood Light mode If there is no Ambilight TV linked or TV is disconnected, the LED light on speaker will automatically switch to Follow Music during music playback. You can select one of the styles that follow the dynamics of the sound. The mood light mode (Lounge mode) of your speaker allows you to switch on the LED light (static light) with or without audio playback. So you can light up your room with LED light.
Adjust brightness Set the level of LED light brightness. Press and once to increase the LED light brightness. Press and once to decrease the LED light brightness. LED light Off To switch off LED light, press the on the speaker to Mode 3 “Off”. button Overview Mode 1 Ambilight TV LED state Follow Ambilight TV Paired Follow the color of Ambilight TV Press and hold for 3 seconds to enter the pairing mode.
6 Play Control playback When playing the music Press to pause or resume play Play from Bluetooth devices With this speaker, you can enjoy audio from your Bluetooth device. Note Adjust the volume Listen to an external device Make sure that the Bluetooth function is enabled on your device. The maximum distance for pairing the speaker and your Bluetooth device is 20 meters (66 feet). Keep away from any other electronic device that may cause interference.
Upgrade Firmware Factory reset To get the best features and supprot, update your product with the latest �rmware version. Reset device to default setting. Update �rmware via Philips Sound app 1 Connect the speaker to power, use a needle to push the Reset button on rear of speaker for 5 seconds. upgraded to the latest version via Philips go to settings menu and select PS Fine it out. If the upgrade is released, the upgraded icon can be pressed to proceed automatically.
7 Product speci�cations Note Product information is subject to change without prior notice. General information Bluetooth Bluetooth version Frequency range Maximum transition power v5.0, AAC, SBC 2404-2480MHz 4dBm Compatible Bluetooth A2DP pro�les Bluetooth range approx.20m Network supported Wireless network 802.11 a/b/g/n/ac < 60W 2.4G Wi-Fi transmitter frequency range 2412-2462MHz Domensions (W x H x D) 142 x 253 x 142mm 2.4G Wi-Fi transmitter power 13±2dBm Weight (main unit) 2.
8 Troubleshooting Warning Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. General I can’t �nd the Bluetooth name of this unit on my Bluetooth device Ensure the Bluetooth function is activated on your Bluetooth device.
9 Notice Any changes or modi�cations made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the product. Compliance Hereby, TP Vision Europe BV declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can �nd the Declaration of Conformity on www.philips.com/support.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Trademark notice Google, Google Play and Chromecast built-in are trademark of Google LLC. Google Assistant is not available in certain languages and countries. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.
Speci�cations are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited. or one of its affiliates, and MMD Hong Kong Holding Limited. is the warrantor in relation to this product. TAFS1 _10_UM_V1.