Fidelio Wireless Home Speaker FS1 User manual Register your product and get support at: www.philips.
Contents 1 Important 3 Safety 3 Help and support 3 2 Your wireless speaker 4 What’s in the box 4 Overview of the speaker 4 3 Get started 6 Plug in the power 6 ŏľĚ ġĚ ½ĚÞ ġŻ 6 4 Connect 7 Connect to Wi-Fi (Wireless Operation) 7 Connect the soundbar to Philips Play-f i enabled TV 5 Lighting operation 11 Pairing with Ambilight TV 11 Follow Music 12 Mood Light mode 12 Adjust brightness 13 W)% ēÿöüŊ dŻ 13 Overview 13 6 Play 2 10 14 Play from Bluetooth devices 14 Control
1 Important Safety Important safety instructions Make sure that the power supply voltage corresponds to the voltage on the back or the underside of the unit. The speaker shall not be exposed to dripping or splashing. Do not place any source of danger on the łĻâ½Đâľ ַâ֣ö֣ ēÿĽŏÿÞ žēēâÞ ġ×čâØŊł֤ ēÿŊ candles). Make sure that there is enough free space around the speaker for ventilation. Please use the speaker safely in an environment with temperature between 0°C and 45°C.
2 Your wireless speaker 11 Back ġĚöľ½Ŋŏē½ŊÿġĚł ġĚ Ůġŏľ ĻŏľØü½łâ֤ ½ĚÞ ŨâēØġęâ Ŋġ ~üÿēÿĻł֨ ġ õŏēēŮ ×âĚâžŊ õľġę Ŋüâ łŏĻĻġľŊ Ŋü½Ŋ ~üÿēÿĻł ġŻâľł֤ ľâöÿłŊâľ Ůġŏľ product at www.philips.com/support. 10 What’s in the box Check and identify the contents of your package: Speaker Power adaptor Power cable Quick start guide Safety sheet Worldwide warranty Overview of the speaker Indicate the status. Press and hold for 3 seconds to enter the pairing with Ambilight TV mode. Press to select the LED light mode.
Wi-Fi Setup button Trigger Wi-Fi setup for Play-Fi. Press and hold the button for 3 seconds to active the WPS mode. Press and hold the button for 8 seconds to active the AP mode. For service USB socket for speaker software upgrade only. No playback function. DC In Connect to the power supply. Press and hold to activate the pairing function or disconnect the existing paired Bluetooth device. Reset Press with a sharp object for 5 seconds to restore factory defaults. 10 Audio In Audio input socket (3.
3 Get started Note üâ łĻâ½Đâľ Ũÿēē ŊŏľĚ ġŻ ½ŏŊġę½ŊÿؽēēŮ ½õŊâľ ԛԟ ęÿĚŏŊâł without user operations and music playback. Plug in the power The speaker is powered by DC input. Connect the adapter cable to the DC in port of the speaker and then into a mains socket. Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.
4 Connect Connect to Wi-Fi (Wireless Operation) 3 Press and hold (Wi-Fi) button located at the back cabinet for 8 seconds to trigger the Wi-Fi connection 5 8 sec (For iOS and Android version) By connecting this unit and mobile ĻüġĚâł֤ Ŋ½×ēâŊł ַłŏØü ½ł ÿP½Þ֤ ÿ~üġĚâ֤ iPġÞ ŊġŏØü֤ ĚÞrġÿÞ ĻüġĚâł֤ âŊØָ֣ Ŋġ Ŋüâ ł½ęâ «ÿֿ;ÿ ĚâŊŨġľĐ֤ Ůġŏ Ø½Ě ŊüâĚ ŏłâ the Philips Sound app powered by DTS ~ē½Ůֿž Ŋġ ØġĚŊľġē Ŋüâ łġŏĚÞ×½ľ Ŋġ ēÿłŊâĚ Ŋġ ½ŏÞÿġ žēâł֣ 1 Download and install the Philips łġŏĚÞ ½ĻĻ ĻġŨâľâÞ ×Ů % Ļē½Ů
5 Launch the Philips Sound app 8 After cġĚĚâØŊÿġĚ֤ Ŋüÿł Ļroduct may ĻġŨâľâÞ ×Ů % ~ē½Ůֿž֣ ;ġēēġŨ Ŋüâ instructions in the app to connect this product to your Wi-Fi network. 5 5 Philips Sound Philips Sound 5 Philips Sound Philips Sound Settings Settings perform a software update. Upgrade to the latest software Settings Philips Sound SETUP SETUP SETUP 6 ue setup.
3 After cġĚĚâØŊÿġĚ֤ Ůġŏ Ø½Ě Øü½Ěöâ AirPlay setup Use AirPlay to set up the Wi-Fi connection of iOS device (iOS7 or later) and speaker. 1 names to choose from or create your Ŋüâ âĚÞ ġõ Ŋüâ Ě½ęâ ēÿłŊ֣ dŊüâľŨÿłâ֤ it follows the default name. home network (xxxxxx) ل device name displays in around 5 seconds. Settings Settings WPS mode Settings Settings لSelect the Play-Fi device in the Airplay set up.
Connect the speaker to Philips Play-fi enabled TV 1 Power up your DTS Play-fi TV connected to the internet. 2 Enter the Settings menu on TV. Surround sound Setup Follow the on-screen setup. TV sound is muted. 1 Setting > Sound > DTS Play-fi Front Speakers One 2 Two 1 TV The home theater speakers are now independent speakers.
5 Lighting operation You can set the built-in LED light of the speaker to follow the color of your Philips ę×ÿēÿöüŊ ª֣ ēŊâľĚ½ŊÿŧâēŮ֤ Ůġŏ Ø½Ě łâŊ Ŋüâ light to show a preset color style or you can łŨÿŊØü Ŋüâ ēÿöüŊ ġŻ֣ Press the button repeatedly on the speaker to switch the light mode: 1.
Follow Music Mood Light mode If there is no Ambilight TV linked or TV is ÞÿłØġĚĚâØŊâÞ֤ Ŋüâ W)% ēÿöüŊ ġĚ łĻâ½Đâľ Ũÿēē automatically switch to Follow Music during music playback. You can select one of the styles that follow the dynamics of the sound. The mood light mode (Lounge mode) of your speaker allows you to switch on the LED light (static light) with or without audio playback. So you can light up your room with LED light.
Adjust brightness Set the level of LED light brightness. Press and once to increase the LED light brightness. Press and once to decrease the LED light brightness. W)% ēÿöüŊ dŻ ġ łŨÿŊØü ġŻ W)% ēÿöüŊ֤ Ļľâłł Ŋüâ ×ŏŊŊġĚ ġĚ Ŋüâ łĻâ½Đâľ Ŋġ ]ġÞâ ԝ dŻ֣ Overview Mode 1 Ambilight TV LED state Follow Ambilight TV Paired Follow the color of Ambilight TV Press and hold for 3 seconds to enter the pairing mode.
6 Play Control playback When playing the music Press to pause or resume play Play from Bluetooth devices With this speaker, you can enjoy audio from your Bluetooth device. Note Adjust the volume Listen to an external device Make sure that the Bluetooth function is enabled on your device. The maximum distance for pairing the speaker and your Bluetooth device is 20 meters (66 feet). Keep away from any other electronic device that may cause interference.
Upgrade Firmware Factory reset ġ öâŊ Ŋüâ ×âłŊ õâ½Ŋŏľâł ½ĚÞ łŏĻĻľġŊ֤ update your product with the latest žľęŨ½re version. Reset device to default setting. ĻÞ½Ŋâ žľęŨ½re via Philips Sound app 1 Connect the speaker to power֤ use a needle to push the Reset button on rear of speaker for 5 seconds. upgraded to the latest version via Philips go to settings menu and select PS Fine it out. If the upgrade is râēâ½łâÞ֤ Ŋüâ upgraded icon can be pressed to proceed automatically.
7 Product łĻâØÿžØ½ŊÿġĚł Note Product information is subject to change without prior notice. General information Bluetooth Bluetooth version Frequency range Maximum transition power ŧԟ֣Ԛ֤ ֤ 2404-2480MHz 4dBm Compatible Bluetooth A2DP Ļľġžēâł Bluetooth range approx.20m Network supported Wireless network 802.11 a/b/g/n/ac < 60W 2.4G Wi-Fi transmitter frequency range 2412-2462MHz Domensions (W x H x D) 142 x 253 x 142mm 2.4G Wi-Fi transmitter power 13±2dBm Weight (main unit) 2.
8 Troubleshooting Warning Risk of electric shock. Never remove the casing of the product. ġ ĐââĻ Ŋüâ Ũ½ľľ½ĚŊŮ ŧ½ēÿÞ֤ Ěâŧâľ ŊľŮ Ŋġ ľâĻ½ÿľ the product yourself. Eõ Ůġŏ ü½ŧâ Ļľġ×ēâęł ŏłÿĚö Ŋüÿł ĻľġÞŏØŊ֤ ØüâØĐ the following points before you request łâľŧÿØâ֣ Eõ Ůġŏ łŊÿēē ü½ŧâ ½ Ļľġ×ēâę֤ öâŊ support at www.philips.com/support. General E ؽĚŊ žĚÞ Ŋüâ ēŏâŊġġŊü Ě½ęâ ġõ Ŋüÿł unit on my Bluetooth device Ensure the Bluetooth function is activated on your Bluetooth device.
9 Notice ĚŮ Øü½Ěöâł ġľ ęġÞÿžØ½ŊÿġĚł ę½Þâ Ŋġ Ŋüÿł device that are not expressly approved by MMD Hong Kong Holding Limited may void the user's authority to operate the product. Compliance Bâľâ×Ů֤ ~ ªÿłÿġĚ )ŏľġĻâ ª ÞâØē½ľâł Ŋü½Ŋ this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can žĚÞ Ŋüâ %âØē½ľ½ŊÿġĚ ġõ ġĚõġľęÿŊŮ ġĚ www.philips.com/support.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. üÿł âĽŏÿĻęâĚŊ öâĚâľ½Ŋâł֤ ŏłâł ½ĚÞ Ø½Ě ľ½Þÿ½Ŋâ ľ½Þÿġ õľâĽŏâĚØŮ âĚâľöŮ֤ ÿõ ĚġŊ ÿĚłŊ½ēēâÞ ½ĚÞ ŏłâÞ ÿĚ ½ØØġľÞ½ĚØâ ŨÿŊü Ŋüâ ÿĚłŊľŏØŊÿġĚł֤ ę½Ů cause harmful interference to radio ØġęęŏĚÿؽŊÿġĚł֣ BġŨâŧâľ֤ Ŋüâľâ ÿł Ěġ guarantee that interference will not occur in a particular installation.
Trademark notice Google, Google Play and Chromecast built-in are trademark of Google LLC. Google Assistant is not available in certain languages and countries. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries.
ĻâØÿžØ½ŊÿġĚł ½ľâ łŏ×čâØŊ Ŋġ Øü½Ěöâ ŨÿŊüġŏŊ ĚġŊÿØâ֣ ~ēâ½łâ ŧÿłÿŊ www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility ġõ ]]% BġĚö UġĚö BġēÞÿĚö WÿęÿŊâÞ֣ ġľ ġĚâ ġõ ÿŊł ½żēÿ½Ŋâł֤ ½ĚÞ ]]% Hong Kong Holding Limited. is the warrantor in relation to this product. TAFS1 _10_UM_V1.