Headphones 1000 Series TAH1108 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 2 Your Bluetooth on-ear headphones 3 Hearing safety General information What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to your Bluetooth device Manage your calls and music 2 2 3 3 4 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old product and battery Remove
1 Important safety instructions Hearing safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth on-ear headphones Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. With these Philips on-ear headphones, you can: • Enjoy convenient wireless handsfree calls • Enjoy and control music wirelessly • Switch between calls and music • Enjoy noise cancellation Quick start guide Global Warranty Safety lea�et What's in the box Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headphones 1 2 3 4 5 6 1 2 3 4 5 6 4 Volume + / Next track Multi-Function Button (MFB) Volume - / Previous track LED indicator USB-C charging slot Microphone EN
3 Get started Charge the battery Note Before you use your headphones for the �rst time, charge the battery for two hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. Connect the supplied USB charging cable to: • • The USB-C charging slot on the headphones and; The charger/USB port of a computer.
4 Use your headphones Manage your calls and music On/off Connect the headphones to your Bluetooth device 1 2 Turn on your mobile phone/ Bluetooth device. Press and hold the MFB button to turn the headphones on.
Other headphones indicator status Headphones status Indicator The headphones are ready for pairing The LED �ashes blue and white alternately The headphones are on but not connected to a Bluetooth device The white LED �ashes slowly. If no connection can be made, the headphones will turn itself off within �ve minutes The headphones are connected to a Bluetooth device while the headphones in standby mode or while you are listening to music The blue LED �ashes slowly.
5 Technical data Headphones Music play time: 15 hours Talk time: 15 hours Charging time: 2 hours Rechargeable lithium ion battery (100 mAh) Bluetooth version: 5.2 Compatible Bluetooth pro�les: • HFP (Hands-Free Pro�le) • A2DP (Advanced Audio Distribution Pro�le) • AVRCP (Audio Video Remote Control Pro�le) Frequency range: 2.402-2.480GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Auto power off USB-C port for charging Note Speci�cations are subject to change without notice.
6 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can �nd the Declaration of Conformity on www.philips.com/support.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
8 Frequently asked questions My Bluetooth headphones do not turn on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphones. How to reset pairing.
2023©MMD Hong Kong Holding Limited. All rights reserved. Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.