Headphones 4000 Series TAH4205 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth over-ear headphones What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 3 3 3 4 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old product and battery Remove the int
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth over-ear headphones Quick start guide Other devices Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips over-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music.
Overview of your Bluetooth wireless headset Microphone Bass boost Music/call/Track control button/volume LED indicator USB Type C charging slot (Power on / off / Pairing)
3 Get started Charge the battery Note Before you use your headphones, place them in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB-C charging cable to avoid any damage. Finish your call before charging. Connecting the earpieces to charge will power them off. If the headset is not used for a long time, the rechargeable battery will begin to lose its charge.
4 Use your headset Manage your calls and music On/off Connect the headset to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button for 2 seconds to turn heaphones on. The white LED will turn on . The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. Button Task On/off Turn the headphones on. Turn the On/off headphones off. Operation Press and hold for 2 seconds. Press and hold for 4 seconds.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. Indicator The blue LED will flash every 7.5s . The LED flashes blue and white alternately. The Blue LED flashes slowly.
5 Technical data Headset Music time: 29 hours (Bass Boost off) Talk time: 21 hours Standby time: 166 hours Charging time: 2 hours Bluetooth version: 5.2 Compatible Bluetooth profiles: • HFP (Hands-Free Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (Audio Video Remote Control Profile) Supported audio codec: SBC Frequency range: 2.402-2.
6 Notice Declaration of conformity Remove the integrated battery Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respective owners.
8 Frequently asked questions My Bluetooth headset does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. How to reset pairing. Let headphone stay in pairing mode (red and blue lights flash alternately), push the power button up to + and hold more than 6 seconds until purple LED light on.
18207-21-12451 Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte a site da ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
