Kids Headphones 4000 Series TAK4607 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 2 Your Bluetooth headphones 3 Hearing safety General information What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 2 2 3 3 4 5 5 5 4 Use your headphones 6 5 Technical data 8 Connect the headphones to your Bluetooth device 6 Manage your calls and music 6 Playtime limit and volume limit can be set up in Philips headphones App 7 6 Notice Declaration
1 Important safety instructions Hearing safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your earpieces. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth headphones Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support.
Overview of your Bluetooth wireless headphones R 1 2 3 4 L 5 1 LED indicator 2 Type C charging slot 3 Volume - 4 Power button / Volume + 5 Multi-function button (MFB) 4 EN
3 Get started Charge the battery Note Before you use your headphones, place them in the charging box and charge the battery for two hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging. Connecting the headphones to charge will power them off. Connect the supplied Type C charging cable to: • • Type C charging slot on the headphones and; The charger/USB port of a computer.
4 Use your headphones Connect the headphones to your Bluetooth device 1 Turn on your mobile phone/ 2 Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED is on 1 second The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically.
Other headphones indicator status Playtime limit: Headphones status Indicator • The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music The headphones are ready for pairing The blue LED �ashes once for every 4 seconds The headphones are on but not connected to a Bluetooth device The blue LED �ashes twice for every 3 seconds.
Volume limit: • • • ! Playtime Limit 30 min > > Product information Software update 30 min > > About Voice prompt ‘Volume limit enabled’ is enabled when the headphones volume is higher than the pre-set volume in the Philips Headphones App. When the headphones are turned off and on again the volume limit will restart. The next day the timer will be reset. To activate it again, please set the volume limit.
5 Technical data Music time: 5 hours Talk time: 4 hours Standby time: 80 hours Charging time: 2 hours Rechargeable lithium polymer battery (200 mAh) Bluetooth version: 5.2 Compatible Bluetooth pro�les: • HFP (Hands-Free Pro�le) • A2DP (Advanced Audio Distribution Pro�le) • AVRCP (Audio Video Remote Control Pro�le) Supported audio codecs: SBC Frequency range: 2.402-2.
6 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can �nd the Declaration of Conformity on www.philips.com/support.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
8 Frequently asked questions My Bluetooth headphones do not turn on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphones. The Bluetooth device cannot �nd the headphones. • The headphones may be connected to a previously paired device. Turn off the connected device or move it out of range.
2022©MMD Hong Kong Holding Limited. All rights reserved. Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
