Portable DVD Players 4000 Series TAP4805 Register your product and get support at www.philips.
1 Safety and important notice 3 2 Your portable DVD player Introduction What’s in the box Overview of the main unit Overview of the monitor Overview of the remote control 6 6 6 7 8 9 3 Get started Charge the battery Install remote control battery Connecting the main unit to the monitor How to use the headrest mount Use your player Control photo play Repeat play Skip play 10 10 11 4 Adjust settings System setup Language setup Audio setup Video setup Digital setup Auto standby Picture Volume Option Syst
1 Hearing safety Listen at a moderate volume. Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound.
Risk of overheating! Never install his product in a confined space. Always leave a space of at least 10 cm around the product for ventilation. Ensure newspapers, table-cloths, curtains or other objects never cover the ventilation slots on the product. Never use the product in tropical climates. Risk of contamination! Do not mix batteries. (old and new or carbon and alkaline, etc.) Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
2 Your portable DVD player Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips. com/support. Introduction Your portable DVD player plays digital video discs that conform to the universal DVD Video standard. With it, you can play movies with true cinema picture quality and stereo or multi-channel sound (depending on disc and playback set-up).
Overview of the main unit 1.LED Display 2.Speakers 3.OPEN : Open the disc compar tment. 4. : To Start, pause or resume play. 5. : Press to stop disc play. 6.MENU : Press to the main menu of the disc. 7.VOL- : Press to reduce the volume. 8.VOL+ : Press to increase the volume.
9.OFF ON : Turn on/off the main unit. 10. : Headphone jack. 11.AV OUT : Connect the AV IN jack of monitor to supply AV signal to monitor. 12.SD/MMC : SD/MMC slot. 13.USB : USB por t. 14.DC OUT: Connect the DC IN jack of monitor to supply power to monitor. 15.DC IN : Power supply socket. Overview of the monitor 1 2 3 4 5 6 7 8 9 10 11 1.LED Display 2.Speakers 3.VOL- : Press to reduce the volume. 4.VOL+ : Press to increase the volume. 5.
Overview of the remote control 1 2 3 4 5 6 13 14 15 16 17 18 7 19 8 20 9 10 21 22 12 Press to turn on the player, or switch the player to standby. Switch between DVD/USB/SD card/AV IN mode. Mark the section for repeat play. Short press to skip to the previous title, chapter, or track; long press for fast rewind play. Short press to skip to the next title, chapter, or track; long press for fast forward 5. play. Enter or exit the system setup menu. 6.SETUP Scroll up. 7.
3 Get started Caution Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your player. The model number and serial number are on the bottom of your player. Write the numbers here: Model No. __________________________ Serial No.
Install remote control battery Caution Risk of explosion! Keep batteries away from heat, sunshine or Àre. Never discard batteries in Àre. Risk of decreased battery life! Never mix different brands or types of batteries. Risk of product damage! When the remote control is not used for long periods, remove the batteries. Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
How to use the headrest mount 1. To use the player in a car, attach the main unit and the monitor to the back of the front seat headrests. (1) Pull the provided strap through the loops on the back of the main unit, and then attach the buckle to the strap. (2) Position the unit at the back of the headrest, and then fasten the buckle. (3) Pull the strap to secure the main unit to the headrest. (4) To attach the monitor, repeat the above steps. 2. And then connect the DC cable and AV connection. 3.
Use your player
Flip the photo up and down. Rotate a photo anti-clockwise/ clockwise. Photos are played from beginning to end one by one. Press once to stop photo play and go back to browse; press twice to go back to menu setting. To cancel repeat play, press and hold REPEAT until [Off] is displayed. Then press OK to proceed.
4 Adjust settings This section helps you adjust the settings of the main unit. Press to go back to previous menu level. Press SETUP to exit the menu.
Menu lang System setup System setup Audio setup Audio setup (when connected to a TV). POWER RESUME : If enabled, the player will resume the play at the position it last stopped, after restarting from a power-off. AUTO PLAY : If enabled, after reading the disc, the player will play the contents of the disc directly. If disabled, after reading the disc, you need to choose the contents that you want to play. KEY : Adjustment of lifting and falling.
This section helps you adjust the settings of the monitor.
PICTURE SYSTEM Press MENU on the monitor. MENU PICTURE BRIGHT : Adjust screen brightness. CONTRAST : Adjust screen contrast. Press MENU on the monitor. Select [ MENU ] [ SYSTEM ] to access the preference setup options. Select the video type to PAL/AUTO/ NTSC. COLOR : Adjust screen color. ENGLISH : Select a subtitle language. CLOCK VOLUME Press MENU on the monitor. Select [ MENU ] [ VOLUME ] to access the preference setup options. Press VOL-/VOL+ to adjust the volume.
5 Software update Supported File Formats 1. Download the software from website. 2. Name the software as 8202KD.BIN, and then copy it to USB. 3. Remove the disc from the player, and turn it on. Insert the USB with copied software into the player's USB port, and the player will upgrade automatically. 6 Specifications Specifications are subject to change without notice. 248 x 168 x 40 mm 0.66 Monitor 248 x 172 x 35 mm 0.35 Input: 100-240V~, 50/60Hz Output: DC 12V, 2.
7 Troubleshooting Supported File Formats 20
2020 © Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product. TAP4805_05_UM_V1.