Headphones 5000 Series TAPN505 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headphone 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones 3 3 4 5 5 5 6 Connect the headphones to a Bluetooth device 6 Connect to ANC(active noise cancelation) 6 Connect to airline audio systems 7 Manage your calls and music 7 5 Technical data 8 6 Notice 9
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphone. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. With this Philips in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music.
Overview of your Bluetooth wireless headphone 7 8 Voice Assistant button Micro USB charging slot ANC On/Off/Ambient sound button ANC On/Off/Ambient sound LED indicator Volume / Track control button LED indicator (Power On / Off / Pairing) Microphone
3 Get started Charge the battery Note Before you use your headphone for the first time, place the headphones in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphone, as connecting the headphone for charging will power the headphone off.
4 Use your headphone Connect the headphone to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED is on 3s. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones will be in pairing mode.
Connect to airline audio systems Connect the audio cable into the plane adapter. Insert the adapter into the dual output jacks in the airplane seat. Connect the audio cable into the headphone. Note Need to turn on headphone when connect to airline audio systems. Manage your calls and music On/off Task Turn the headphones on. Turn the headphones off. Button On/off, music/call control On/off, music/call control Operation Press and hold for 3 seconds. Press and hold for 5 seconds.
5 Technical data Music time — ANC enabled with Bluetooth: 9 hours | ANC disabled with Bluetooth: 14 hours Talk time — ANC enabled with Bluetooth: 9 hours | ANC disabled with Bluetooth: 14 hours Standby time — ANC enabled with Bluetooth: 160 hours | ANC disabled with Bluetooth: 160 hours Charging time: 2 hours Rechargeable lithium polymer battery (180 mAh) Bluetooth version: 5.
6 Notice Declaration of conformity Remove the integrated battery Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and the Google Logo are registered trademarks of Google Inc.
8 Frequently asked questions My Bluetooth headphone does not turn on. The battery level is low. Charge the headphone. I cannot pair my Bluetooth headphone with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphone. The Bluetooth device cannot find the headphone. • The headphone may be connected to a previously paired device. Turn off the connected device or move it out of range.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_TAPN505_00_EN_V4.
