User manual

EN16
8 Use system
settings menu
1
In working mode, press to access the menu.
2
Turn SELECT knob repeatedly to select
[System settings].
3
Press SELECT knob to confirm.
4
Repeat steps 2 to 3 to select an option.
[Equaliser]: select equaliser mode.
[Network]: enable you to establish
network connection.
[Time/Date]: set time and date.
[Language]: select system language.
[Factory Reset]: reset the radio to
factory default status.
[Software update]: check the software
update information.
[Setup wizard]: instruct you to perform
initial setup.
[Info]: know software version.
[Privacy policy]: view privacy notice.
[Backlight]: adjust backlight settings.
Note
If no button is pressed within 15 seconds, the
menu exits.
Adjust network settings
1
Select [System settings]>[Network].
2
Turn SELECT knob to select an option or
sub-option, then press SELECT knob to
confirm.
[Network wizard]: instruct you to
establish network connection.
[PBC Wlan setup]: select this option if
your wireless router supports WPS and
PBC setup method.
[View settings]: view the current
network information.
[Manual settings]:
[DHCP enable]: allocate IP address
automatically.
[DHCP disable]: allocate IP address
manually
[NetRemote PIN Setup]: set up net
remote enter password.
[Network profile]: display a list of the
networks remembered by the radio.
[Clear network settings]: clear
network settings selection.
[Keep network connected?]: select
whether to keep the network connected.
Set time/date
1
Select [System settings]>[Time/Date].
2
Turn SELECT knob to select an option or
sub-option, then press SELECT knob to
confirm.
[Set Time/Date]: set time and date.
[Auto update]:
[Update from DAB]: synchronize
time with DAB stations.
[Update from FM]: synchronize
time with FM stations.
[Update from Network]:
synchronize time with Internet
radio stations.
[No update]: deactivate time
synchronization.
[Set format]: set 12/24 hour format.
[Set timezone]: set timezone.
[Daylight savings]: activate or
deactivate daylight saving time.