User manual
EN 17
Note
• If you are updating time from DAB or FM, the
daylight savings option has no eect.
• If you are updating from the network, set your
time zone.
Set system language
1
Select [System settings]>[Language].
A language list is displayed.
2
Turn SELECT knob to select a system
language then press SELECT knob to
confirm.
Reset all the settings
1
Select [System settings]>[Factory Reset].
2
Turn SELECT knob to select an option,
then press SELECT knobto confirm.
• [Yes]: Reset the radio to factory default
status.
• [No]: Return to the previous menu.
Check software update
information
1
Select [System settings]> [Software
update].
2
Turn SELECT knob to select an option or
sub-option, then press SELECT knob to
confirm.
• [Auto-check setting]: select whether
to check new software versions
periodically.
• [Check now]: check new software
versions immediately
Note
• If the radio detects that new software is available,
it asks if you want to go ahead with an update. If
you agree, the new software is downloaded and
installed.
• Before software upgrade, make sure that the
radio is connected to a stable mains power
connection. Disconnecting power during a
software update may damage the product.
Know the software version
• Select [System settings]>[lnfo].
The current software version is shown.
Adjust backlight settings
1
Select [System settings]>[Backlight].
2
Turn SELECT knob to select an option or
sub- option, then press SELECT knob to
confirm.
• [Timeout]: select a timeout period for
display backlight.
• [On level]: select a brightness level for
the backlight.
• [Dim level]: select a display brightness
level among Medium, Low and O.