User manual

EN 7
• [Skip WPS]: select this option if your
wireless router does not support WPS.
You are prompted to enter the key for
your Wi-Fi network.
10
As instructed on the display panel, press
WPS button or enter the pin on your
wineless router; or enter the key to
connect to your network (The options
displayed depend on the type of your
network and network protection used).
• When entering the key of the network,
to select a character; turn SELECT
knob, then press SELECT knob to
confirm.
• To cancel, turn SELECT knob to select
[CANCEL].
• To confirm your entry, turn SELECT
knob to select [OK].
• To delete the entry, turn SELECT knob
to select [BKSP].
• To exit the process, press .
If the network connection is
established, [Connected] is
displayed.
11
When [Setup wizard completed] appears,
press OK to exit the setting.
Tip
• For some Wi-Fi routers, you may need to hold
the WPS button for Wi-Fi connection. See the
user manuals of the specific routers for details.
• To run the setup wizard again, select [System
settings]>[Setup wizard] menu (see the
Chapter "Use system settings menu").
Turn on
• Press .
The radio switches to the last selected
source.
Switch to standby mode
• Press again.
The display panel is dimmed.
The time and date (if set) are displayed.
Note
• If the system is idle for 15 minutes, the radio
switches to standby mode automatically.
Source menu
Press to enter into source menu.
Internet Radio
1
Turn SELECT knob to select source.
2
Press SELECT knob to confirm selection.