SH402 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Reconnect the headphones to a Bluetooth device Manage your calls and music Wear your headset 3 3 3 3 4 4 5 5 5 5 6 5 Technical data 7 6 Notice 8 Declaration of conformity Disposal of your old produ
Operate in a place where temperature is between 0ºC (32ºF) and 45ºC(113ºF) (up to 90% relative humidity). store in a place where temperature is between -25ºC (-13ºF) and 55ºC(131ºF) (up to 50% relative humidity).
2 Your Bluetooth wireless headset Quick start guide Other devices Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. A mobile phone or device (e.g.
3 Get started earliest paired device is replaced by the new one. 1 Charge the battery Note Before you use your headset for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headphones, as connecting the headphones off. You can operate the headphones normally during charging.
4 Use your headphones Manage your calls and music On/off Connect the headphones to a Bluetooth device Turn on your mobile phone/Bluetooth device. Press and hold for 3 seconds to turn the headphones on. Task Turn the headpnones on. Turn the headpnones off. Button The blue light on. The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the headphone can not connect to last device within 13s, enter pairing mode.
Mute/unmute the microphone in a call. Double click Adjust the headband to fit your head. Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music The headphones are ready for pairing. Indicator The blue LED flashes for every 5 seconds. The LED flashes blue and white alternately. The headphones are on but not connected to a Bluetooth device.
5 Technical data Music time: 20 hours Talk time: 20 hours Standby time: 800 hours Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (200 mAh) Bluetooth 5.0, support (Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Frequency range: 2.402-2.
8 EN
FCC Compliance Statement: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Make sure your mobile phone not only supports (mono) HFP but also supports A2DP (see “Technical data” on page 7 ).
UM_TASH402_00_EN_V1.