Sports 5000 Series TASN503 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 3 3 3 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposal of your old product and battery Compliance wit
1 Important safety instructions General information To avoid damage or malfunction: Caution Do not expose headphones to excessive heat Do not drop your headphones. Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft doth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music.
Overview of your Bluetooth wireless headset - Volume control button Multi-function buttons + Volume control button Heart rate button LED indicator Micro USB charging slot Microphone
3 Get started Pair the headphones with your mobile phone Before you use the headphones with Charge the battery Note charge the battery for 3 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headset, as connecting the headset for charging will Connect the supplied USB charging cable to: • • it with a mobile phone.
4 Use your headset Connect the headset to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Manage your calls and music Button Task Turn the headphones on. Turn the head- turn the headphones on. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Indicator The blue LED flashes for every 10 seconds. The LED flashes blue and white alternately. The blue LED 5 seconds. If no connection can be made, the headphones will turn itself off within 5 minutes. Low battery level.
5 Technical data Headset Music time: 6 hours Talk time: 8 hours Standby time: 160 hours Charging time: 2 hours Rechargeable lithium polymer battery (120 mAh) Bluetooth version: 5.0 • A2DP (Advanced Audio Distri- • AVRCP (Audio Video Remote Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm (Only for EU) Operating range: Up to 10 meters (33 feet) Digital echo & noise reduction Note notice.
6 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive of Conformity on www.p4c.philips.com. Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
7 Frequently asked questions My Bluetooth headset does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. Pairing does not work. • • • Make sure the headset are in pairing mode. Follow the steps described in this user manual (see “Pair the headset with your mobile phone” on page 5 ).
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product. UM_TASN503_00_EN_V2.