Headphones 1000 Series TAT1108 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 2 Your True wireless earpieces 3 Hearing safety General information What's in the box Other devices Overview of your True wireless earpieces 3 Get started Charge the battery How to wear Pair the earpieces with your Bluetooth device for the �rst time Pair the earpieces with another Bluetooth device 4 Use your earpieces Connect the earpieces to your Bluetooth device Power on/off Manage your calls and music Voice Assistant Earpieces/charging case LED indicator
1 Important safety instructions Hearing safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your True wireless earpieces Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. With these Philips True wireless earpieces you can: • Enjoy convenient wireless handsfree calls • Enjoy and control music wirelessly • Switch between calls and music Quick start guide Warranty Safety lea�et What's in the box Other devices A mobile phone or device (e.g.
Overview of your True wireless earpieces 1 2 3 4 LED indicator (Earpieces) Multi-function button LED indicator (charging box) USB-C charging slot 4 EN
3 Get started Charge the battery Charging case Plug one end of the USB-C cable into the charging case and the other end into the power source. Note Before you use your headphones, place them in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB-C charging cable to avoid any damage. Finish your call before charging. Connecting the earpieces to charge will power them off.
How to wear Select suitable ear tips for optimum �t A tight, secure �t will provide the best sound quality and noise isolation. 1 2 Test which ear tip provides you with the best sound and wearing comfort. 3 sizes of silicone ear tip covers are provided: large, medium and small. L M Pair the earpieces with your Bluetooth device for the �rst time 1 Make sure that the earpieces are fully charged and powered off. 2 Open the cover of the charging case. Take the earpieces out.
The following example shows you how to pair the earpieces with your Bluetooth device. 1 Turn on the Bluetooth function of your Bluetooth device, select Philips TAT1108. 2 Enter the earpieces' password “0000” (4 zeros) if prompted. For those devices featuring Bluetooth 3.0 or higher, there is no need to enter a password.
4 Use your earpieces Connect the earpieces to your Bluetooth device 1 2 Turn on the Bluetooth function of your Bluetooth device. Power on/off Task MFB Turn the earpieces on Take earpieces out of the charging box to power on Turn the earpieces off Put earpieces back into the charging box to power off Take out earpieces from the charging box cover. The blue LED �ashes The earpieces will search the last connected Bluetooth device and reconnect to it automatically.
Voice Assistant Task Button Operation Trigger Voice (Siri/Google) Assistant R/L earpiece Press and hold 2 seconds Stop Voice Assistant R/L earpiece Press once Charging box LED indicator status When charging Indicator Case charging White LED blink 1x every 1 second Full charged White LED lights on Earpieces LED indicator status Earpieces status Indicator The earpieces are connected to a Bluetooth device The earpieces are ready for pairing White LED on for 2 seconds The earpieces are on but
5 Reset the earpieces If you encounter any pairing or connection issue, you can follow the following procedure to reset your earpieces to factory default settings. 1 On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT1108 from the device list. 2 Turn off the Bluetooth function of your Bluetooth device. 3 Take the earpieces out of the charging case and press the button once, then press and hold for 5 seconds. 4 Return the earpieces to the charging case.
6 Technical data • • • • • • • • • • • Music play time: 5+10 hours Charging time: 2 hours Lithium-ion battery 35 mAh on each earpiece, Lithium-ion battery 250 mAh on charging box Bluetooth version: 5.3 Compatible Bluetooth pro�les: • HFP (Hands-Free Pro�le) • A2DP (Advanced Audio Distribution Pro�le) • AVRCP (Audio Video Remote Control Pro�le) Supported audio codecs: SBC Frequency range: 2.402-2.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can �nd the Declaration of Conformity on www.philips.com/support.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic �elds. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and Google Play are trademarks of Google LLC.
9 Frequently asked questions My Bluetooth earpieces do not turn on. The battery level is low. Charge the earpieces. I cannot pair my Bluetooth earpieces with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earpieces. Pairing does not work. • Put both earpieces into charging box. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
2023 © MMD Hong Kong Holding Limited. All rights reserved. Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.