Headphones 2000 Series TAT2206 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your True wireless earphones 3 What's in the box Other devices Overview of your True wireless earphones 3 Get started 3 3 4 5 Charge the battery 5 Pair the earphones with your Bluetooth device for the first time 5 Pair the earphones with another Bluetooth device 6 4 Use your headphones Connect the earphones to your Bluetooth device Power on/off Manage your calls and music LED indicator status Voice Assistant 5 R
1 Important safety instructions Hearing Safety Danger To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your earphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your True wireless earphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips True wireless earphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Quick start guide Global Warranty Safety leaflet What's in the box Other devices A mobile phone or device (e.g.
Overview of your True wireless earphones 1 2 3 4 5 LED indicator (Earphones) Multi-function button Microphone LED indicator (charging box) USB-C charging slot
3 Get started Charge the battery Note Before you use your earphones for the first time, place the earphones in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB-C charging cable to avoid any damage. Finish your call before charging the earphones, as connecting the earphones for charging will power the earphones off. Pair the earphones with your Bluetooth device for the first time 1 2 Make sure that the earphones is fully charged.
The following example shows you how to pair the earphones with your Bluetooth device. 1 Turn on the Bluetooth function of your Bluetooth device, select Philips TAT2206. 2 Enter the earphones password “0000” (4 zeros) if prompted. For those Bluetooth devices featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Connect the earphones to your Bluetooth device 1 Turn on the Bluetooth function of your Bluetooth device. 2 Open the top cover from charging box. The blue LED flashes. The earphones will search the last connected Bluetooth device and reconnect to it automatically. If the last connected device is not available, the earphones will enter pairing mode.
Call control Task Multifunction button Pick up/ Right / Left Hang up Call earpiece Reject an Right / Left incoming call earpiece When charging Indicator Operation Battery low Amber LED light up single tap Relative adequate battery Off In use and cover is open Indicator Battery low Amber LED light up Relatively adequate battery White LED light up Tap and hold Switch call Right / Left triple taps during 3-way earpiece call LED indicator status Headphones status The earphones are connected to
5 Reset the earphones 1 TAT2206 2 3 Press once on both earphones, and then press and hold for 5 seconds. Follow steps in “Use your earphones-Connect the earphones to your Bluetooth device.” 5 Pair the earphones with your Bluetooth device, select Philips TAT2206.
6 Technical data Music time: 6 hours Talk time: 6 hours Standby time — 200 hours Charging time: 2 hours Lithium-ion battery 55 mAh on each earpiece, Lithium-ion battery 350mAh on charging box Bluetooth version: 5.0 Compatible Bluetooth profiles: • HFP (Hands-Free Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (Audio Video Remote Control Profile) Supported audio codec: SBC Frequency range: 2.402-2.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and Google Play are trademarks of Google LLC.
9 Frequently asked questions My Bluetooth earphones do not turn on. The battery level is low. Charge the earphones. I cannot pair my Bluetooth earphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the earphones. Pairing does not work. • Put both earphones into charging box. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_TAT2206_00_EN_V2.