Headphones 3000 Series TAT3215 TAT3255 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth wireless headset What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headset with your Bluetooth device at the Ėrst time Pair the headset with another Bluetooth device 2 2 2 3 3 3 4 5 5 6 6 4 Use your headset 7 Reconnect the headset to your Bluetooth device 7 Manage your calls and music LED indicator status How to wear 5 Factory reset the headset
1 Important safety instructions Hearing Safety Danger • To avoid hearing damage, limit the time you use headset at high volume and set the volume to a safe level. The louder the volume the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • • • • • • • Listen at reasonable volumes for reasonable periods of time. Be careful not to adjust the volume continuously upwards as your hearing adapts.
2 Your Bluetooth wireless headset Congratulations on your purchase, and welcome to Philips! To fully beneĖt from the product at www.philips. com/welcome. With this Philips wireless headset, you can: •enjoy convenient wireless handsfree calls; •enjoy and control wireless music; •switch between calls and music. What's in the box USB Type-C charging cable (for charging only) Quick start guide Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headset 1. Microphone 2. Multi-function buttons 3. LED indicator (headset) 4. USB-C charging slot 5.
3 Get started • • Charging process is veriĖed by white LED lights on the earpieces. When the headset is fully charged, Charge the battery Note • place the headsets in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime. • Use only the original USB charging cable to avoid any damage.
In right headset, it has voice "Pairing" and LED Ęashes in white and blue. The headset is now in pairing mode and is ready to pair with a Bluetooth device (e.g. a mobile phone). Single headset pairing (Mono mode) Take the right headset ("Master device" ) from the charging case, the earpiece will power on automatically. There will be a voice "Power on" from right headset. Turn on the Bluetooth function of your Bluetooth device. Pair the headset with your Bluetooth device.
4 Use your headset Reconnect the headset to your Bluetooth device Turn on the Bluetooth function of your Bluetooth device. Take both headsets from the charging case, the headset will power on and reconnect automatically. If no device is connected, the headset will automatically Task Tip • • The headset cannot connect to more than 1 device at the same time. If you have two paired Bluetooth devices, only turn on the Bluetooth function of the device that you want to connect.
Call control Task Multifunction button Pick up/hang Right/Left headset up a call. Reject an Right/Left incoming headset call. Switch caller Right/Left during a call. headset Operation Press once. Press and hold for 2 seconds. Press and hold for 2 seconds. Voice control Task Siri/Google Low battery level (headset). Multifunction button Operation Right/Left headset Press twice You will hear 'battery low' on the headset.
Battery LED indicator on Charging case with USB Type-C cable While charging headset, Blue LED status as below: 4 blue LED stay on for 70-100% power 5 Factory reset the headset If you encounter any pairing or connection issue, you can follow the following procedure to factory reset your headset. 2 blue LED stay on and 3rd LED Ęashes every second for 50-75% power On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT3215 from the device list.
6 Technical data Headset Music time: 6 hours (additional 18 hrs wiht charging case) Talk time: 5 hours (additional 15 hrs with charging case) Standby time: 80 hours Charging time: 2 hours Rechargeable lithiumion battery: 50 mAH on each earpiece Bluetooth version: 5.1 Compatible Bluetooth proĖles: • HSP (Hands-Free ProĖle-HFP) • A2DP (Advanced Audio Distribution ProĖle) • AVRCP (Audio Video Remote Control ProĖle) Supported audio codec: SBC Frequency range: 2.
7 Notice Declaration of conformity Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can Ėnd the Declaration of Conformity on www.p4c.philips.com. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headset.
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic Ėelds. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
8 Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S. and other countries. Google Google and Google Logo are registered trademarks of Google Inc.
9 Frequently asked questions My Bluetooth headset does not turn on. The battery level is low. Charge the headset. I cannot pair the Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth function on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. Pairing does not work. • Put both earpieces into charging case. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices.
I hear but cannot control music on my Bluetooth device (e.g. play/pause/skip forward/backward). Make sure the Bluetooth audio source supports AVRCP (see 'Technical data" on page 10) The volume level of the headset is too low. Some Bluetooth devices cannot link the volume level with the headset through volume sync In this case, you have to adjust the volume on your Bluetooth device independently to achieve an appropriate volume level.
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicas aplicados. Para maiores informações, consulte a site da ANATEL: www.anatel.gov.br Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.