User manual

14 15ENEN
Key & Operate Action
Press key on
master speaker
Play/pause the music
on all connected
speakers
Press VOL +/－
key on master
speaker
Increase or decrease
volume on all
connected speakers
Press DBB key
on master
speaker
Change DBB setting on
all speakers
Press and hold
power key on
master speaker
for 3 seconds
Power o master
speaker, all slave
speakers will exit party
link mode
Press and hold
key on selected
slave speaker for
3 seconds
Power o selected
slave speaker, there
is no eect on master
speaker and other slave
speakers
Press and
hold key
on selected
speaker in
standby state
Power on selected
speaker and pressing
PartyLink key again to
enter PartyLink mode
Press key on
master speaker
Change light mode in
all connected speakers
Press key on
slave speakers
No change light
mode in all connected
speakers
Press and hold
key on master
speaker for 3
seconds
Change brightness in
all speakers
Press PartyLink
button on
selected slave
speaker
Disconnect selected
slave speaker from
master speaker
Press and hold
PartyLink
button on
master speaker
for 3 seconds
Disconnect all speakers
and exit PartyLink
mode
Play audio through USB
Enjoy audio on a USB storage device,
such as an MP3 player and USB ash
memory, etc.
Note
• Make sure that the USB device contains
playable audio contents in supported formats.
Supported formats: MP3, WAV, WMA, FLAC.
FLAC format audio only supports not over 16
bit rate.
• The unit supports max 128G USB and le format
FAT16/FAT32/exFAT.
• Support a USB port: 5V 0.5A.
1 Insert the USB device.
» The unit will switch to the USB
mode and play automatically.
Key Action
Short press Start, pause or resume play.
Long press Skip to the next track.