Manual

Your Onis Memo recorder (Onis Mémo) 15
Listening to received messages
The
E
symbol on the handset screen indicates that new messages have been
received.
Press
r
to enter memo recorder mode.
The day, time and number of messages received are displayed.
The memo recorder plays back the messages automatically.
To handle your messages during playback, use the following keys:
Press
<
to play the current message again.
Press
<
twice to hear the previous message again.
Press
>
to listen to the next message.
Press
s
to stop message playback.
Press
r
to exit memo recorder mode.
Erasing messages
Erasing individual messages
Press the
r
key on the handset.
The display shows the day, time and the number of messages received.
The memo recorder plays back the messages automatically.
While listening to the messages, press
x
when the memo recorder
plays back the message you want to erase.
A beep confirms that the message has been erased. The number of the
received messages displayed is updated automatically.
Erasing all the messages received
Press
r
, then
s
. Press and hold
x
for 2 seconds.
A beep confirms that all the messages have been erased.
Personalising your memo recorder
If you have recorded an outgoing message and set the day and time, your memo
recorder is ready for use. However, you can also personalise the settings on your
memo recorder.
The following settings are available:
•
Define a remote control code (
RCC: - - - -
)
See
“Entering a remote control code”
on page 16.
•
Choose the number of times the telephone rings before your memo recorder
picks up (Number of rings). See
“Changing the number of rings”
on page 16.
•
Decide whether your callers can leave a message (
RECORD ON/OFF
).
See
“Switching message record on or off”
on page 17.
1
2
3
4
1
2
1