Manual

Your Onis Memo recorder (Onis Mémo) 17
If your memo recorder has received messages, it will answer on the
third
ring.
If no messages have been recorded, it will answer on the
fifth
ring.
Switching message record on or off
If you do
not
want callers to leave message, switch off the message record
function (
RECORD OFF
).
If you want callers to be able to leave messages again, switch on the incoming
message record function (
RECORD ON
).
Your Onis Memo is delivered with the message record function set to ON.
Press
R
, then press
-
until you reach
ANSW SETUP
. Press
o
.
Press
-
until you reach
RECORD
, then press
o
.
Press
-
or
+
to select ON or OFF, then press
o
to confirm your
choice.
The handset beeps to confirm the new setting.
Press
R
to exit menu mode.
Your memo recorder’s advanced functions
Recording a local message
You can use the memo recorder to leave a message for someone who has access
to your memo recorder. The message will be stored with the received messages.
Press
r
to enter memo recorder mode then, if message playback
starts, press
s
.
Press
K
and then press
V
right away.
RECORD
is displayed.
Speak clearly within 10 cm of the handset microphone.
To stop recording, press
s
.
A beep indicates the end of the recording.
The local message will be added to any other messages left by callers. It will
be counted and played back in the same way as the other messages.
Press
r
to exit memo recorder mode.
Tip
If there are no messages, you can hang up after the
fourth
ring
and not pay for the call.
1
2
3
4
1
2
3
4
5