User Manual
Table Of Contents
- Guarantee
- MAIN ACCESS MENU
- Contents
- Base station
- Handset
- Security
- Installation
- Using the telephone
- Operating in "standby mode"
- Making a call from the handset
- Making a call from the Zenia Voice 6326 base station
- Dialling a number using the to direct dial keys
- Dialling an emergency number using the key
- Making a call from the Zenia Voice 6626 base station
- Answering a call from the handset
- Redial list
- Answering a call from the base station (6326 and Voice 6626)
- Adjusting handset or base station volume during a call
- Switching on loudspeakers from the handset
- Putting an incoming call on hold
- Recording a conversation from the Zenia Voice 6626 handset only
- Call log
- Private and shared phonebooks
- Voice dial (Zenia Voice 6626)
- Using the intercom
- Using the answer phone (Zenia Voice 6626 only)
- System configuration
- Maintenance and troubleshooting
- Index
- Remote control
Using the telephone
19
Putting an incoming call on hold
You can put a call on hold: The external caller either hears music, if music on hold
is activated (see “5.7 Switching music on hold on/off”, page 48), or a waiting tone.
1) From handset
Select the "HOLD" function using the or keys, then confirm with the
key.
To switch back to the call, press the key again.
2) From base station
Press the key to put the current call on hold.
To switch back to the call, press the key again.
Recording a conversation from the Zenia Voice 6626
handset only
Select the "Record" option using the scroll keys and .
Press the key.
The conversation is recorded for a maximum of 2 minutes.
If you want to stop recording, press the key again.
To listen to the recorded conversation, please view the chapter “Listening to
messages received”, page 32.
prelim-zenia.book Page 19 Mardi, 20. juin 2000 10:31 10