User Manual
Table Of Contents
- Guarantee
- MAIN ACCESS MENU
- Contents
- Base station
- Handset
- Security
- Installation
- Using the telephone
- Operating in "standby mode"
- Making a call from the handset
- Making a call from the Zenia Voice 6326 base station
- Dialling a number using the to direct dial keys
- Dialling an emergency number using the key
- Making a call from the Zenia Voice 6626 base station
- Answering a call from the handset
- Redial list
- Answering a call from the base station (6326 and Voice 6626)
- Adjusting handset or base station volume during a call
- Switching on loudspeakers from the handset
- Putting an incoming call on hold
- Recording a conversation from the Zenia Voice 6626 handset only
- Call log
- Private and shared phonebooks
- Voice dial (Zenia Voice 6626)
- Using the intercom
- Using the answer phone (Zenia Voice 6626 only)
- System configuration
- Maintenance and troubleshooting
- Index
- Remote control
Using the answer phone (Zenia Voice 6626 only)
32
Screening and intercepting incoming calls
While the answer phone is recording a caller's message:
•the
E
symbol on the screen flashes,
•the
t
symbol on the screen is displayed.
You can listen to the call before deciding to answer by pressing the key.
The
/
icon on the screen is displayed.
You can listen to your caller’s message via the handset loudspeaker, without being
heard. The answer phone will still be in record mode.
To answer the call that is being screened, press the key.
Listening to messages received
If a caller has left a new message during your absence, the green light flashes.
• the display shows the number of new messages,
•the
E
symbol on the screen flashes.
Press the key.
The call log is automatically displayed and the details of the
caller who left the oldest message appears.
: Caller identification is subject to network selection.
A voice message indicates the date and time of the call.
The answer phone starts to play the oldest message, followed
by any subsequent message.
: You can repeat the last message by pressing the scroll key .
When the last message has been played, the handset reverts to "standby mode".
The
E
symbol on the screen stops flashing and the green light goes out.
: You can replay old messages by viewing the call log. Scroll through the call
log using the scroll keys and ; if a message is associated with an
entry of the list, the
E
symbol is displayed.
10 MAY 10:30
3 new
PLAY
CALL LOG
John Smith
01712345678
OPTIONS
CALL LOG
10 MAY 10:30
OPTIONS
or
prelim-zenia.book Page 32 Mardi, 20. juin 2000 10:31 10