User Manual
Table Of Contents
- Guarantee
- MAIN ACCESS MENU
- Contents
- Base station
- Handset
- Security
- Installation
- Using the telephone
- Operating in "standby mode"
- Making a call from the handset
- Making a call from the Zenia Voice 6326 base station
- Dialling a number using the to direct dial keys
- Dialling an emergency number using the key
- Making a call from the Zenia Voice 6626 base station
- Answering a call from the handset
- Redial list
- Answering a call from the base station (6326 and Voice 6626)
- Adjusting handset or base station volume during a call
- Switching on loudspeakers from the handset
- Putting an incoming call on hold
- Recording a conversation from the Zenia Voice 6626 handset only
- Call log
- Private and shared phonebooks
- Voice dial (Zenia Voice 6626)
- Using the intercom
- Using the answer phone (Zenia Voice 6626 only)
- System configuration
- Maintenance and troubleshooting
- Index
- Remote control
System configuration36
System configuration
Overview of the configuration menu
You can customise and configure certain functions of the telephone by accessing
"SETTINGS".
This main menu is divided into six sub-menus, as follows:
1. Handset sounds,
2. Handset settings,
3. Base station settings,
4. Answer phone settings,
5. Line settings,
6. Security.
These sub-menus are divided into functions each comprising several settings. The
structure of each sub-menu is represented in table form (see following pages). The
table also shows for each function or setting, the corresponding keypad shortcut,
which gives you faster access to the desired setting.
In each table, the box indicates the ex-factory setting for your telephone.
: Only one setting per function can be active at a time.
Settings
From "standby mode", go to "SETTINGS" by pressing the
scroll keys and as many times as required.
Confirm by pressing the key.
The first sub-menu appears in the middle of the display.
Select the desired menu using the scroll keys and .
The selected sub-menu appears in the middle of the display.
: For certain menus, the system will request a code.
Enter the Pin via the keypad.
As you type it in, stars appear on the second line of the screen.
: You can correct an error using the key.
Confirm by pressing the key.
The designation of the first function appears in the middle of
the screen.
Press the key to access the selected function.
10 MAY 10:05
Philips 1
SETTINGS
SETTINGS
Headset
Sounds
SELECT
HANDSET
Earpiece
volume
SELECT
ENTER PIN:
***
∆
DONE
SUB-MENU X.X
Function
SELECT
prelim-zenia.book Page 36 Mardi, 20. juin 2000 10:31 10