User Manual
Table Of Contents
- Guarantee
- MAIN ACCESS MENU
- Contents
- Base station
- Handset
- Security
- Installation
- Using the telephone
- Operating in "standby mode"
- Making a call from the handset
- Making a call from the Zenia Voice 6326 base station
- Dialling a number using the to direct dial keys
- Dialling an emergency number using the key
- Making a call from the Zenia Voice 6626 base station
- Answering a call from the handset
- Redial list
- Answering a call from the base station (6326 and Voice 6626)
- Adjusting handset or base station volume during a call
- Switching on loudspeakers from the handset
- Putting an incoming call on hold
- Recording a conversation from the Zenia Voice 6626 handset only
- Call log
- Private and shared phonebooks
- Voice dial (Zenia Voice 6626)
- Using the intercom
- Using the answer phone (Zenia Voice 6626 only)
- System configuration
- Maintenance and troubleshooting
- Index
- Remote control
Remote
control
(using a tone telephone)
Dial your telephone number.
*
After listening to the outgoing
message, press the
*
key, then enter
your code (4 digits).
During message playback:
Dial
•
Stop message playback
........................ 8
•
Erase message
..................................... 6
•
Replay current message
........................ 1
•
Replay previous message
.................1+1
•
Play next message
................................ 3
*
the answerphone is not switched on, wait for the dial
tone after 9 rings.
1
2
3
Remote
control
(using a tone telephone)
Dial your telephone number.
*
After listening to the outgoing
message, press the
*
key, then enter
your code (4 digits).
During message playback:
Dial
•
Stop message playback
........................8
•
Erase message
.....................................6
•
Replay current message
........................1
•
Replay previous message
.................1+1
•
Play next message
................................3
*
the answerphone is not switched on, wait for the dial
tone after 9 rings.
1
2
3
Remote
control
(using a tone telephone)
Dial your telephone number.
*
After listening to the outgoing
message, press the
*
key, then enter
your code (4 digits).
During message playback:
Dial
•
Stop message playback
........................ 8
•
Erase message
..................................... 6
•
Replay current message
........................ 1
•
Replay previous message
.................1+1
•
Play next message
................................ 3
*
the answerphone is not switched on, wait for the dial
tone after 9 rings.
1
2
3
Remote
control
(using a tone telephone)
Dial your telephone number.
*
After listening to the outgoing
message, press the
*
key, then enter
your code (4 digits).
During message playback:
Dial
•
Stop message playback
........................8
•
Erase message
.....................................6
•
Replay current message
........................1
•
Replay previous message
.................1+1
•
Play next message
................................3
*
the answerphone is not switched on, wait for the dial
tone after 9 rings.
1
2
3
prelim-zenia.book Page 59 Mardi, 20. juin 2000 10:31 10