Owner manual

9
POWER
SLEEP
A/CH STATUS/EXIT CC CLOCK
RECORD
TV
VCR
ACC
SMART
SMARTSMART
SOUND
PICTURE
MENU SURF
VOL
CH
MUTE
1
2 3
4
5
6
7
8 9
0
TV/VCR
SWAP
SOURCE POSITION FREEZE
PIP ON/OFF
SET CLOCK - - :- - AM
TIMER ACTIVE ON
CHANNEL 12
SET CLOCK 10:00 AM
TIMER ACTIVE ON
CHANNEL 12
2
3
4
1
SETTING THE TV’S CLOCK
Y
our television comes with an
onscreen clock. During normal
operation the clock appears on the
screen when the STATUS/EXIT but-
ton is pressed or when a channel
change occurs.
Press the CLOCK button on
the remote to display the onscreen
CLOCK menu.
Press the CURSOR UP © OR
CURSOR DOWN ■ buttons until
the words SET CLOCK are high-
lighted.
Enter the current time using
the NUMBERED buttons. If the
first number is a single digit first
enter a zero then the digit (i.e.,
press “0”, then press “8”).
Press the CURSOR RIGHT
©© or CURSOR LEFT §§ but-
tons to set either AM or PM time.
Note: The CLOCK onscreen menu
can also be accessed through the
main menu by pressing the MENU
button; then scrolling up/down
with the CURSOR UP © or
CURSOR DOWN ■ buttons until
the word CLOCK is highlighted.
Press the CURSOR RIGHT
©©
button to activate the CLOCK
menu and follow the steps above to
set the time.
SMART HELP
Remember: Be sure to
press “0” first and then the
hour number for single digit
entries.
To clear the onscreen menu press
the STATUS/EXIT button, or wait
a few seconds after you have fin-
ished your adjustment and the
menu will automatically disappear
from the screen.
BEGIN
Note: If a power failure occurs, the TV's
CLOCK will have to be reset.
If no time is set, the time will not appear
onscreen.