COVER L9 TS2746C1
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
SAFETY INSTRUCTIONS - Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3.
TABLE OF CONTENTS Introduction Welcome/Registration of Your TV ............................2 Safety/Precautions .....................................................3 Table of Contents.......................................................4 Features ......................................................................4 Basic Cable TV Hookups ..........................................5 Basic Antenna Hookups.............................................6 Basic TV to VCR Hookup.................................
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS) SMART CABLE TV HELP Y our Cable TV input into your home may be a single (75 ohm) cable, or a Converter Box installation. In either case the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down tight. Remember: Set the TV for the type signal you've just connected (see the “Tuner” section on page 11 of this manual.
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS) SMART ANTENNA HELP A combination antenna receives normal broadcast channels (VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna plug on the back of your TV - and that’s where the antenna goes. BEGIN Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV. U/V Combiner If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS) TV TO VCR T he basic Antenna, or Cable TV, to VCR to TV connection is shown to the right. For more information on other hookups (possible when Cable Converter/Descrambler boxes are included) refer to your accessory VCR and Cable Converter Owner's Manual for details. BEGIN Connect your Antenna or Cable TV signal to the IN FROM ANT(enna) plug on the VCR. Connect the OUT TO TV plug on the VCR to the 75 Ω plug on the TV (connecting cable supplied with the VCR.
BASIC TV/REMOTE OPERATIONS TELEVISION BEGIN Press the POWER button to turn the TV ON. Press the VOLUME + button to increase the sound level or the VOLUME – button to lower the sound level. Pressing both buttons at the same time will display the onscreen menu. Once in the menu, use these button to make adjustments or selections. STEREO 6 INSTALL / MENU – VOLUME + CHANNEL POWER Press the CHANNEL UP ▲ or DOWN ▼ button to select TV channels.
TV REMOTE BUTTONS Power Button Press to turn the TV ON and OFF. Channel (+), (–) Buttons Press to change the tuned channel. Status/Exit Button Press to see the current channel number on the TV screen. Also press to clear the TV screen after control adjustments. STATUS/EXIT Cursor Buttons POWER CH VOL Use these button to select and adjust the TV’s onscreen menu. VOL Volume (+), (–) Buttons MUTE CH A/CH Press to turn the sound OFF on the TV.
USING THE LANGUAGE CONTROL F or our Spanish and French speaking TV owners an onscreen LANGUAGE option is present. With the LANGUAGE control you can set the TV’s onscreen menu to be shown in either English, Spanish, or French. BEGIN Press the MENU button on the remote to show the onscreen menu. Press the CURSOR UP ▲ or DOWN ▼ buttons to scroll through the onscreen menu until the word SETUP is highlighted.
USING THE TUNER CONTROL T he TUNER feature allows you to change the TV’s signal input to either CABLE, ANTENNA or AUTO mode. It’s important for the TV to know what type of signal to look for. (From a Cable TV signal or a normal Antenna signal.) In the AUTO mode, when the AUTO PROGRAM feature is activated, the TV will automatically choose the correct mode. BEGIN Press the MENU button on the remote to show the onscreen menu.
USING THE AUTO PROGRAM CONTROL Y our TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed. Note: Make sure the antenna or cable signal connection has been completed before AUTO PROGRAM is activated. BEGIN Press the MENU button on the remote to show the onscreen menu.
HOW TO ADD AND DELETE CHANNELS C hannel Edit makes it easy for you to ADD or DELETE channels from the list of channels stored in the TV’s memory. BEGIN Press the MENU button on the remote to show the onscreen menu. Press the CURSOR UP ▲ or DOWN ▼ buttons to scroll through the onscreen menu until the word SETUP is highlighted. Press the CURSOR RIGHT © button to display the SETUP menu features.
USING THE EXTERNAL CONTROL T he External feature allows you to rename your input source selections. When the Input feature (refer to Owner’s Manual for details) is accessed to change audio/video jacks, your source selection will be called by the name you choose. This name will also appear onscreen when using the audio/video inputs. BEGIN Press the MENU button on the remote to show the onscreen menu.
HOW TO ADJUST THE TV PICTURE T o adjust your TV picture controls, select a channel and follow the steps shown below: BEGIN Press the MENU button on the remote to display the onscreen menu. Press the CURSOR UP ▲ or DOWN ▼ buttons until the word BRIGHTNESS is highlighted. (Or, COLOR, PICTURE, SHARPNESS, TINT depending on the adjustment you want to make.) Press the CURSOR RIGHT © or the CURSOR LEFT § buttons to increase or decrease the brightness of the picture.
ACTIVATING THE NOISE REDUCTION (PICTURE) CONTROL F or many reasons such as poor cable reception, the picture can sometime appear slightly “speckled” (or signal noise shown in the picture). The NOISE REDUCTION control can help eliminate this type of interference and improve the quality of the picture. BEGIN Press the MENU button on the remote to display the onscreen menu.
USING THE CLOSED CAPTION CONTROL C losed Captioning (CC) allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired, this feature uses onscreen “text boxes” to show dialogue and conversations while the TV program is in progress. NOTE: Not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included.
USING THE SLEEPTIMER CONTROL H ave you ever fallen asleep in front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off. 12 15 MIN BEGIN 12 Press the SLEEP button on the remote control and the SLEEP timer onscreen display will appear in the lower center of the display.
USING THE TV’S ALTERNATE CHANNEL BUTTON T he Alternate Channel option allows you to move between two channels with the simple touch of one button. BEGIN Press the CHANNEL (+) or (–) buttons (or the NUMBER buttons) to select a channel. 5 Press the CHANNEL (+) or (–) buttons (or the NUMBER buttons) to select a second channel. 24 Now, by pressing the A/CH (Alternate Channel) button on the remote, you can toggle between the two selected channels.
UNDERSTANDING THE SMARTLOCK™ CONTROL T he SmartLock feature is an integrated circuit that receives and processes data sent by broadcasters, or other program providers, that contain program content advisories. When programmed by the viewer, a TV with SmartLock can respond to the content advisories and block program content that may be found objectionable (such as offensive language, violence, sexual situations, etc.). This is a great feature to censor the type of viewing children may watch.
UNDERSTANDING THE SMARTLOCK CONTROL (ACCESS CODE) TM O ver the next few pages you’ll learn how to block channels and get a better understanding of the rating terms for certain programming. First, let’s start by learning how to set a personal access code: INPUT ON SLEEPTIMER OFF CC Press the MENU button on the remote to display the onscreen menu. OFF © SETUP Using the NUMBERED buttons, enter 0, 7, 1, 1. “XXXX” appears on the Access Code screen as you press the numbered buttons.
UNDERSTANDING THE SMARTLOCK CONTROL (BLOCK CHANNEL) TM A fter your personal access code has been set (see previous page), you are now ready to select the channels you want to block out or censor. © INPUT BEGIN SLEEPTIMER Press the MENU button on the remote to show the onscreen menu. OFF CC OFF © SETUP Press the CURSOR UP ▲ or CURSOR DOWN ▼ button until the words SmartLock are highlighted.
UNDERSTANDING THE SMARTLOCK CONTROL (BLOCKING OPTIONS) TM S martLock offers the viewer other blocking features as well. With these Blocking Option features, the censoring can be turned ON or OFF. © INPUT BEGIN SLEEPTIMER Press the MENU button on the remote to display the onscreen menu. OFF SmartLock © SmartLock CC OFF ACCESS CODE © SETUP _ _ _ _ Press the CURSOR UP ▲ or CURSOR DOWN ▼ buttons until the words SmartLock are highlighted.
UNDERSTANDING THE SMARTLOCK CONTROL (MOVIE RATINGS) TM SMART HELP T here are two types of program ratings within the SmartLock feature. One is based on the Movie Industry ratings while the other is based on the TV Industry ratings. Both can be used to block or censor programming that has been rated in either manner.
UNDERSTANDING THE SMARTLOCK CONTROL (PARENTAL GUIDELINE) TM SMART HELP T his portion of the SmartLock features cover program ratings based on the TV Industry rating system. This is know as Parental Guideline within SmartLock. After selecting the SmartLock feature and entering your personal access code, the BLOCK/CHANGE CODE screen appears; BLOCK © CHANGE CODE © BLOCKING OPTIONS Remember: Selecting to block any rating will cause all the higher ratings to also be blocked automatically.
UNDERSTANDING THE SMARTLOCK CONTROL (REVIEW SCREEN) TM N ow that you’ve learn how to block channels or censor your viewing using the Movie Ratings or Parental (TV) Guidelines let’s review what you’ve done. The SmartLock Review feature allows you to see what has been blocked. Whenever the Menu button is pressed the onscreen menu will be displayed with the SmartLock Review highlighted.
HOW TO SET THE TV FOR STEREO PROGRAMS Y our TV can detect a stereo signal and will set itself automatically so the stereo sound can be heard. However, there may be occasions when you might want to set the TV to mono. The following steps describe how to change the SOUND control: BEGIN Press the MENU button on the remote to show the onscreen menu. Press the CURSOR UP ▲ or CURSOR DOWN ▼ button until the word SOUND is highlighted.
USING THE TV VOLUME BAR CONTROL U se the Volume Bar control to see the TV’s volume level settings on the TV screen. The Volume Bar will be seen each time the VOLUME buttons (on the TV or remote) are pressed. BEGIN Press the MENU button to display the onscreen menu. TINT 0 NOISE REDUCTION ON VOLUME 15 SOUND STEREO © INPUT Press the CURSOR UP ▲ or CURSOR DOWN ▼ buttons until the word VOLUME is highlighted.
HOW TO USE THE INPUT CONTROL (A/V INPUTS) AUDIO/VIDEO INPUTS The TV’s Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar device) that has Audio/Video Output jacks. 1 BEGIN 75 V 75 V VIDEO 1 L/MONO Connect the VIDEO (yellow) CABLE to the VIDEO IN jack on the back of the TV. Then connect the AUDIO (red and white) CABLES to the AUDIO (left and right) IN jacks on the rear of the TV.
TIPS IF SOMETHING ISN'T WORKING P lease make these simple checks before calling for service. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not covered under your warranty. CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage.
GLOSSARY TO TELEVISION TERMS Coaxial Cable • A single solid antenna wire normally matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR. Closed Caption • Broadcast standard which allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses onscreen "text boxes" to show dialogue and conversations while the TV program is in progress.
INDEX Accessories/Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 Programming Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Adapter Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 Add/Delete Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Philips Consumer Electronics Company Factory Service Center Locations See Reverse Side for More Details. Detroit/Toledo • Cleveland/ • N Ohio • • Chicago ★ Columbus • • San Francisco/Metro Area ★ Los Angeles ★ Charlotte • Knoxville/E Tennessee • ★ Pittsburgh/WV Area • Atlanta/N Georgia • Dallas ★ Wash/Balt ★ Orlando • ★ Indicates In-Home Service Only 1-800-242-9225 • Philadelphia/S New Jersey Houston/Galveston Beaumont/Austin San Antonio • Tampa/W Florida ★ Ft.
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
NOTES
LIMITED WARRANTY COLOR TELEVISION 90 Days Free Labor One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube) This product can be repaired in-home. WHO IS COVERED? MAKE SURE YOU KEEP... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Please keep your sales receipt or other document showing proof of purchase.
