Operation Manual
Step 3: Update the TV software
1 Connect the USB flash drive (containing the
software update) to the USB connector on
the TV.
2 Switch on the TV.
3 Find the software in the USB flash drive.
Press , select [All Settings] > [Update
Software] > [Local Updates], then press OK.
Select the file that you downloaded.
4 Follow the on-screen instructions to update
the TV software.
Click [Next] to start Programming
Press [Continue] and press [Start] at the
bottom of the screen
Now the set screen will go black and start
again
[Installing system update…] will appear on
the screen
Again the set screen will go black and start
again
5 Once complete, disconnect the USB flash
drive from the TV.
Note
T
o
p
r
e
v
e
n
t
a
cc
i
de
n
t
a
l
u
pda
t
e
s
t
o
t
h
e
T
V
s
o
f
t
w
a
r
e
,
de
l
e
t
e all files
f
r
o
m
t
h
e
U
S
B
fl
a
s
h
d
r
i
v
e
.
Note
If the USB flash drive is not detected, disconnect it and
reconnect again.
Warning
Do not switch off the T V or remove the USB flash
drive during the software update.
If a power failure occurs during the update, do not
remove the USB flash drive from the T V. The T V will
continue the update as soon as power is restored.
If an error occurs during the update, retry the
procedure. If the error reoccurs, contact Philips
Consumer Care.