Monochrome CCD observation camera ‘The Stratification referred to in this manual are printed on the insides of the twe fold-out cover pages. Contents introduction Connecting the camera.. The power supply. The video output . The connection cable Changing the length of the cable The lens., installing the caner: ‘The mounting bracket Maintenance tips Technical specifications.
in a recess on the back of the camera {fig. 42}, You can change its setting by sliding it with the help of a sharp pencil or toothpick, The connection cable “The connection cable supped with the caners has a length of 10 meters {33 feet). i the distance between camera and monitor happens 1o be shorter or longer, you can easily make & spacial cable, using a standard coaxial cable {available at your dealer's) and the extra coaxial plugs supplied with your camera (fig. 7).
installing the camera Iris advisable to install the camera first and connect it fo the system monitor or the spot. it will allow you to properly aim the camera at the area yau want covered while checking the results an the monster (see below), When satisfied you can place the monitor in its permanent position. The mounting bracket « First determine where you want to install the camera.
Technical specifications image pick-up device 148" CCD Swanning system CCmR| 626 fines, interfaced Output signal RF video and Audio VHF switchable between channels Band 4 {external switch) VOMS121/00T: CIR-B Integrated lens 8 mm, F 2.0, manual focus Nonplussing range Normal: 050 m to infinity Macro 0050 0.