Video Cassette Recorder Owner's Manual

REW 12:00 PM
STEREO CH. 12
SAP
SHARP
B−−−−−+−5 −−+−−−−+−−−−−E
REMAINING
TIME 0:59
SLP 0:00:00 HIFI
28 On-Screen Status Displays
5
Press the MENU button.
•
If ON SCREEN MODE is set to ON or
COUNTER:
• You may bring up the status display
at any time by pressing the OK/STA-
TUSbutton. (The exception is during
Slow, Search, or Still mode.) The dis-
play will appear for about five sec-
onds.
• Channel numbers (if memorized by
the VCR) will appear for a few sec-
onds.
• When tape playback is stopped, press
the OK/STATUSbutton repeatedly to
see the current time, remaining tape
time, real-time counter, or current TV
channel number on the display panel.
During tape playback, press the
OK/STATUS button repeatedly to see
the current time, remaining tape time,
or real-time counter on the display
panel. The current TV channel will not
appear.
• Depending on the type of tape used,
the remaining tape time may not
appear right away, or may not be cor-
rect. Also, “– – : – –” may appear, or
the display may flash if the VCR is still
calculating the remaining tape time.
Helpful Hints
An on-screen status display will appear when you press the
OK/STATUS button or certain function buttons. The contents of
the status display will vary; the status display describes the current
operations of the VCR.
ON SCREEN MODE ON:
• Whenever you press the PLAY 8 button or the STOP 9 but-
ton, some of the contents of the status display will appear for
five seconds.
ON SCREEN MODE COUNTER:
• The real-time counter will appear on the screen during normal
tape playback and when playback is stopped. Whenever you
press the PLAY 8 button or the STOP 9 button, some of the
contents of the status display will appear for five seconds. After
five seconds, only the counter will remain on the screen.
ON SCREEN MODE OFF:
• No status display will appear when you press function buttons
or the OK/STATUS button. (Information about the current tape
position will still appear during rewinding or fast forwarding.)
To select a status display mode, follow these steps.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the OK/STATUS button.
4
Press the FF - button repeatedly so that ON,
COUNTER, or OFF appears beside ON SCREEN MODE.
Current VCR operation
Time
Channel
Real-time counter
SmartPicture setting
Tape speed
Sound program
selected
Sound program available
Tape time remaining
➔ VCR SET UP
TUNER SET UP
INITIAL SET UP
TAPE MANAGER
SELECT: 89 CONFIRM: OK
END: MENU
3
Press the PLAY 8 or STOP 9 button to select ON
SCREEN MODE.
➔ DSPC ON
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
NEXT PAGE
SELECT: 89 CHANGE: ’
END: MENU
Current tape position
(B is the beginning of the tape; E is
the end of the tape. A flashing square
indicates where you are on the tape
during fast forwarding or rewinding.)