Video Cassette Recorder Owner's Manual

The VR1010BP allows recording in Super VHS ET (Expansion
Technology). You can play back those cassettes recorded in S-
VHS ET on a VCR equipped with S-VHS ET. You can record with
S-VHS picture quality on VHS cassettes.
1
Before you begin the recording, press the S-VHS ET but-
ton on the front of the VCR so that the button lights.
When the button is lit, recordings will be in S-VHS format.
• Pressing the S-VHS ET button has no
effect on an S-VHS tape.
• To obtain the highest quality recording
and to play pictures over a longer peri-
od, S-VHS recording on S-VHS tape is
recommended.
• Label S-VHSET recordings so you can
easily distinguish them from regular
VHS recordings.
• S-VHS ET recordings can be played on
an S-VHS VCR or a VHS VCR
equipped with SQPB (S-VHS QUASI
PLAYBACK). However, there may be
cases where S-VHSET playback is not
possible on a particular VCR.
• Frequent still, frame-by-frame, and slow
motion playback may damage the
tape and cause the picture quality to
decline.
• With some tapes, better picture quality
may not be obtained even with S-VHS
ET recording. Test a recording first to
make sure better results can be
obtained.
• Use high grade tapes for good results.
Helpful Hints
3
When recording is finished, press the S-VHS ET button
again to cancel S-VHS ET recording.
32 S-VHS ET (VR1010BP only)
SUPER VHS ET
CRYSTAL CLEAR VIDEO TAPE MANAGER TURBO TIMER
REC/OTR
MENU
OK/STATUS
S-VHS ET
AUDIO
POWER
VCR/TV
VR 1010 4 HEAD HI-FI STEREO
CHANNEL
PLAYPAUSE/STILL
STOP/EJECT
OPEN A/V FRONT CONNECTORS
DUBBING
VIDEO CASSETTE RECORDER
TURBO
DRIVE
VCR
SP SLP
NORM
-15dB
6
0
4
+8
L
2
Press the REC/OTR button to start recording the current
channel. The S-VHS ET button has no effect once the recording
has begun.
1, 3
2