Video Recorders (VCR) Operating Manual

The JOG/SHUTTLE functions
You will find a large rotary knob (Shuttle) o on the video
recorder and on the remote control.
a Switch the function on with the STILL/JOG ON R button
on the remote control or the STILL R button on the
video recorder.
You will see a still picture.
b You can select the next single frame forwards or
backwards with the jog button on the remote control or
the video recorder.
c Turning the inner disc continuously to the right or to the
left switches to slow motion.
d The outer (shuttle) ring enables you to select different
tape speeds for picture search.
The JOG/SHUTTLE functions on the remote
control
You will find a large rotary knob (Shuttle) o on the remote
control.
a Switch the function on with the STILL/JOG ON R button
on the remote control.
You will see a still picture.
b Use the inner disc (jog) on the remote control to select
the next or previous still picture.
c Turning the inner disc continuously to the right or to the
left switches to slow motion.
d The outer (shuttle) ring enables you to select different
tape speeds for the picture search.
Searching for tape position without the
picture (wind and rewind)
a Stop the tape with the h button.
b Press the H (reverse) or I (forward) button. If you
want to carry out this function on your video recorder,
turn the large knob (shuttle) o to the left or to the
right.
c To stop a certain place on the tape, press the h button.
Instant View
With this function you can switch to picture search during
wind and rewind.
a If you hold the H (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
DIf you want to carry out this function on your video
recorder, turn the large knob to the left or to the
right while you wind or rewind the tape.
b When you release the button, the video recorder will
automatically switch back to rewind or wind.
Automatic search for a tape position
(index search)
At the start of each recording, the video recorder will write an
index code on the tape.
a Press the INDEX E button and then the I button to
select the next code mark or the H button for the
previous code mark.
b When the video recorder finds the code mark, it will
automatically switch to play.
Selecting the picture setting
(SMART PICTURE)
You can change the picture setting while a tape is playing.
a Press the SMART button. This will show the current
picture setting.
b Press the SMART button again to select the picture
setting of your choise.
’NATURAL’: for all types of movies (natural picture)
’DISTINCT’: for fast movement, sport (detailed picture)
’SOFT’: for hired tapes (interference is suppressed)
’SHARP’: for cartoons (sharp picture)
DThis picture setting will not change until you eject
the cassette.
19