Video Cassette Recorder Owner's Manual

10 Turning on Your VCR
Before turning on your VCR, make sure batteries are in the
remote control and the VCR, TV, and Cable Box/DBS (if applica-
ble) are connected.
1
Press the VCR button, then press the POWER button.
3
Press the PLAY o or STOP p button to select the lan-
guage of the on-screen displays and menus.
2
Turn on the TV.
5
Press the OK/STATUS button to begin automatic channel
setup. AUTO CH. SET PROCEEDING PLEASE WAIT will appear
on the screen. The VCR will memorize all of the channels you
receive, so when you scan through channels using the CH(annel)
K/L button, you’ll only scan through channels that you receive.
4
Press the OK/STATUS button. The menu shown below will
appear.
6
When channels are set up, AUTO CH. SET COMPLETED will
appear on the screen briefly.
6
Wait for the VCR to set up
channels.
➔ ENGLISH
ESPAÑOL
FRANÇAIS
SELECT: KL CONFIRM: OK
END: MENU
CONNECT ANTENNA OR CABLE
TO VCR FOR AUTO CH. SET
READY: OK
END: MENU
• Auto or – – : – – may appear on
the display panel until the clock is
set.
• If you do not want to set up chan-
nels now, press the MENU button
at step 5. TUNER NOT SET will
appear on the screen briefly.
• You may not set up channels at step
5 if you are using a Cable Box/DBS.
Helpful Hints
3
4-5
1
2
Turn on the TV. Set it to channel 3 or 4, whichever chan-
nel the CH3/CH4 switch on the back of the VCR is set to.
The menu shown below will appear.
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CHVOL
OK/STATUS
TIMER
TURBO REC END
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS
DAILY
PLAY
REW FF
STOP
WEEKLY
/OTR
RECREC
-
+
-
+
SPEED
0
CLEAR
.............
.............
........
........
SEARCH
MUTE
TIMER
AUDIO/ SKIP
SEARCH
EJECT
ALT
-
-