System information

Use 3 or 4 and 2 to enter Settings followed by Network, then Wireless.
> Display: Searching for Networks...
List of networks appears. (Network Not Found appears if no network is found.)
Select the Wi-Fi network (router) to which your desired UPnP device is connected.
Press 2 to continue.
In screen Set IP Mode, select Automatic.
As prompted, select Ye s to apply the settings.
> Center is connected to the Wi-Fi home network.
Any Stations might be disconnected from the Wi-Fi network of Center.
Tip
If you change the WEP / WPA / WPA2 key after you have added the WAC3500D into your
home network, the connection between the WAC3500D and your home network will be lost.
In this case, please restart WAC3500D Center in order to refresh the IP update.
Applicable if you already have a wireless network (hub/switch/router).
11.3 Connect to wired home network
The wired home network can be a single PC, a PC network, another Center or a Station.
Center can access the wired and wireless home network at the same time. Using the supplied
Ethernet cable, you can connect Center separately to a wired network while maintaining its Wi-Fi
connection (e.g. the Wi-Fi connection between Center and on or more Stations, or the Wi-Fi
connection with a home network). In this way, you can opt to play the music library of the wired
network only on Center or a single Station (UPnP playback).
At the same time, you can still enjoy all the music playback features on the Wi-Fi network.
7
6
If you already know the WEP / WPA
/ WPA2 key for the Wi-Fi network:
Use the remote control to enter
the WEP,WPA, or WPA2 key.
Press OK to
confirm.
If there is no WEP / WPA / WPA2
key for the Wi-Fi network:
Press OK to skip.
5
4
3
2
Network settings
66
Downloaded From Disc-Player.com Philips Manuals