Wireless Music Station WAS700 User manual Manuel d'utilisation Manual del usuario Benutzerhandbuch P001-P033_WAS700_Eng 1 9/28/2005, 09:39
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
1 2 34 ! 09 8 7 65 3 P001-P033_WAS700_Eng 3 9/28/2005, 09:39
P001-P033_WAS700_Eng 4 9/28/2005, 09:39
Please contact: Mr. Bin Li BLC Audio PDCC Development 5/F., Philips Electronics Building 5 Science Park East Avenue Hong Kong Science Park Shatin Hong Kong Français Français -------------------------------------------- 34 Español Philips Electronics Hong Kong Ltd.
Contents English General Information HD About Wireless Music Station WAS700 ......... Supplied accessories ............................................ Philips on-line support ........................................ Environmental information ................................ Maintenance .......................................................... Safety information ................................................ 7 7 8 9 9 9 Controls Controls on the Station ....................................
About Wireless Music Station WAS700 Up to 5 WAS700 Stations can be connected to a WAC700 Center. English General Information Supplied accessories – Station’s remote control with 1 x CR2025 battery – 1 x FM wire antenna – 1 x Mounting kit On WAC700’s hard disk, you can centrally store audio CDs. All the stored music can be wirelessly streamed, via Wi-Fi**, from Center to connected Stations. No need to be bound to your CD player or PC etc., or be troubled by the wiring.
General Information English Philips on-line support Philips products have been designed and manufactured to the highest quality standards. If your Philips Connected Planet product is not working correctly, we recommend you check your User Manual to verify that your product is properly connected and configured. The web site for Connected Planet support: www.philips.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Controls (illustrations on page 3) English Controls on the Station ( front panel) 81 – 1 SAME ARTIST – – – – HD: plays all the tracks of current artist SAME GENRE HD: plays all the tracks of current genre – MENU enters or exits setup menu – 3 / 4 HD: skips/searches tracks/passage backward/ forward (in playback screen); fast scrolls the option list Radio: tunes to radio stations – 2 / OK confirms selection – OK HD: starts or pauses playback shows status of Station 3 MUSIC FOLLOWS ME – – HD:
English Controls 4Ç Station’s remote control – stops playback 53 – / 4 Scroll scroll the display screen upward or downward 6 View 1 2 – ¡ 7 Repeat ) 3 – selects continuous playback – Shuffle selects random playback ™ 4 ( 5 6 7 & 8 ^ % $ # 8 VOL +, – * Same Artist Same Genre 9 @ ! adjusts the volume level 9 Sleep – ajusts/displays/switches off sleep timer 0 DBB(Dynamic Bass Boost) – 0 Smart EQ toggles playback display and previous option list turns the bass enhancement on (D
Controls English ( – – – 1 / 2 / 3 / 4 navigation controls (left, right, up, down) to scroll through the option list 1 HD: returns to previous option lists Radio: enters the list of preset stations – 3 / 4 HD: skips/searches tracks/passage backward/ forward (in playback screen); fast scrolls the option list Radio: tunes to radio stations – 2 / OK confirms selection – )à/ – ¡ – á HD: searches track passage backward/forward (in playback screen) O, P HD: skips tracks backward/forward (in playback sc
English Installation FM antenna 75 Ω FM ANTENNA AC power cord 13 P001-P033_WAS700_Eng 13 9/28/2005, 09:39
Installation English Placing Station Rear connections With the detachable stand and by-packed wall mounting kit, WAS700 Station allows you to place it in two ways: on desktops with stands or on walls without stands. Warning: Never make or change connections with the mains supply switched on. A Antenna Connection 1 Extend the wire antenna and fit it to FM ANTENNA as shown below.
3 4 Extend the extension line and move it in different positions for optimal reception (as far away as possible from the TV, VCR or other radiation sources). 1 Fix the extension line’s end to the ceiling. 2 Using AC power Make sure all the connections have been made before switching on the power supply. Connect the AC power cord to the wall socket. This switches on the power supply. When Station is switched to standby, it is still consuming some power.
Installation English Setting up Wi-Fi connection between Center and Station If there is interference from neighborhood, such as the pause during playback, the sets’ slow response to your operation – Keep the Center or Station at least 3 meters away from microwave ovens, DECT phones, bluetooth devices (e.g. headphones, a computer mouse), wireless access points (e.g. routers), cordless phones, Wi-Fi compatible printers and PDAs, etc..
– Some functional keys on Center’s remote control are exclusively used for Center (for example, CD/MP3-CD, MARK/UNMARK, MUSIC BROADCAST etc.) Using the remote control WAS700 is equipped with a remote control. You can use it to operate both Center and Station. IMPORTANT! – Remove the protective plastic tab before using the Station’s remote control. – Always point the remote control directly towards IR area on the Center or Station you wish to operate. 1 1 2 3 4 Press and hold 1 as indicated.
Basic functions English Switching to standby/on and selecting functions 1 When the set is on, press STANDBY-ON/ ECO POWER to switch it to standby (or y on the remote control) ➜ The screen dims out.
English Basic functions Sound control Equalizer Equalizer enables you to select predefined sound settings. 1 2 Press MENU to enter the MENU screen Use the navigation controls 3 or 4 and 2 to select Equalizer 3 Press 3 or 4 and 2 to select Rock, Pop (default), Jazz, Neutral, Techno, Classical or Bass/Treble 4 Press OK or 2 to confirm. Same Artist Same Genre Smart EQ Incredible surround ● Press Incr. Surr. once or more to turn the surround sound effect on or off. ➜ Display shows IS ON or IS OFF.
Basic functions English Display adjustment Selecting languages You can adjust the display’s backlight and contrast settings 1 2 3 4 1 2 Press MENU to enter the MENU screen Use the navigation controls 3 or 4 and 2 to select Settings Press 3 or 4 and 2 to select Display Press 1 / 2 / 3 / 4 to select your options: 3 4 Press MENU to enter the MENU screen Use the navigation controls 3 or 4 and 2 to select Settings Use the navigation controls 3 or 4 and 2 to select Language Press 3 or 4 and 2 to select: E
Playing Harddisk (HD) On WAC700 Center is located a hard disk, where music is centrally stored. Via Wi-Fi, all the stored music can be streamed and played on Station.
HD(located on Center) English Selecting and searching Selecting a different album or track 1 2 3 Finding a passage within a track during playback 1 If necessary, repeatedly press 1 to enter previous option lists Repeatedly press the navigation controls 3 or 4 and 2 to select the desired album or track. Press VIEW to return to the playback screen, if necessary.
Different play modes: REPEAT, SHUFFLE Creating Playlist: custom collection of your favorite music – plays the current track continuously – repeats all the tracks (under current artist, genre or album ) – repeats all the tracks (under current artist, genre or album) in random order – tracks (under current artist, genre or album) are played in random order 1 During playback, press once or more REPEAT or/ and SHUFFLE to select play modes.
HD(located on Center) English 1 Deleting a playlist, album or track Moving in your WiFi network of Center and Stations Use the navigation controls 3 or 4 and 2 to enter a category (Playlist, Artists, Albums, Genres, All tracks) Move music In the WiFi network consisting of Center and up to 5 Stations. Even in different places of your house, you and your family will enjoy and share music with ease.
➜ Selected music stops on the first unit and continues on the second unit. The icon disappears. ➜ Selected play modes (e.g. , )are retained on the second unit (see Different play modes: REPEAT, SHUFFLE) 6 To stop MUSIC FOLLOWS ME, press STOP/Çon the second unit. Smart EQ ➜ On Center and Station (s): Selected 4 music plays simultaneously several seconds after the 5-second countdown.
FM radio English 1 2 Tuning to radio stations Storing preset radio stations Check the set is switched on or to standby (See Basic functions, Switching on/to standby and selecting functions, Switching to Eco power/ on) You can store up to 40 preset radio stations in the memory. Press SOURCE once or more to select Radio (on the remote control, press TUNER/AUX once or more) ➜ Playback screen appears. Display shows: Radio, radio station frequency and If programmed, a preset number.
RDS Deactivating NEWS RDS (Radio Data System) is a service that allows FM stations to send additional information along with FM radio signal. 1 2 English FM radio Tune to the desired RDS radio station (see Autostore: automatic programming) Press RDS/NEWS repeatedly to view the following information (if available): – Station name – program type (for example: News, Pop Music) – RDS radio text ● Press RDS/NEWS again on the remote control.
AUX/ SLEEP English AUX (Listening to an external source) SLEEP You can set a certain period of time after which the Station will switch to standby.
If both Center and Stations are reset: Reset If desired, you can restore your Center or Stations to their default setting (including the network setting).
Specifications English General AC Power WAS700 ...................................................... 220V ±10% Power consumption Active WAS700 ................................................................ < 25W Standby WAS700 ................................................................ < 14W Eco Power Standby WAS700 ................................................................... < 1W Dimensions (w x h x d) WAS700 ................................... 360 x 283 x 128mm Weight WAS700 ..............
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution Wi-Fi connection: During the first-time setup, Station’s display shows “Searching for Center”.
Troubleshooting English x flashes on the sychro display of Center’s remote control ✔ Signal error. Check you have pointed the remote After the set is switched on, nothing appears on the sychro display of Center’s remote control ✔ You switched on the set by using the control on The remote control does not function properly. ✔ Remove the protective plastic tab before using control toward the IR area of the set you wish to operate the set instead of center’s remote control.
How to mount your Station onto walls IMPORTANT! – The wall mounting instructions are for the use of the qualified wall mounting person only! – Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall, fixing the mounting brackets to the wall, and mounting the sets onto the brackets. Mounting your Station 1 2 3 4 What’s in the supplied mounting kits Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions.