Software Upgrade

Software information

Version number: 1.30.xxxx

_______________________________________________________________________________________

Benefits:

1. When starting up from power off or Eco-standby, it will now first enter “UPnP” mode instead of

“FM radio” mode to avoid unintentional sound.

2. Improvement has been done on the playback compatibility with USB devices.

3. Navigation performance has been improved for browsing through Internet radio stations.

4. Now in the Internet radio play screen, only one total play time will be shown to avoid confusion.

_______________________________________________________________________________________

How do I check the current software version on my device?

1. In active mode, press the MENU button on the remote.

2. Press to select Information, press OK.

3. Press to highlight System and press OK. You will find the software version as FW version

x.xx.xxxx.

________________________________________________________________________________________

How do I update the software on my device?

Make sure the supplied WADM software has been installed on your computer before the software

update. If you have not installed this software yet, please get it from the current webpage, go to the

Software & drivers section and click the Download button next to Device/Firmware Manager.

1. Click the Download button to download the latest device software on your computer.

2. Unzip the downloaded file to get the software file.

Note: DO NOT rename this file to avoid software upgrade failure.

3. Switch on the Wireless Micro System and then connect it to your home network.

4. Run the WADM software on your computer and establish connection with your device.

5. On the WADM screen, select Device Configuration.

6. In the Device Configuration screen, select Firmware upgrade and click OK.

7. Click Browse to select the unzipped software file on your computer.

8. Click Apply to start the upgrade.

9. When the software upgrade is completed, you will see a pop-up message saying “Firmware upgrade

success” and the device will restart itself.

________________________________________________________________________________________

Software Upgrade History

Version 1.28.xxxx: Initial Release.

PAGE 1
Software information Version number: 1.30.xxxx _______________________________________________________________________________________ Benefits: 1. When starting up from power off or Eco-standby, it will now first enter “UPnP” mode instead of “FM radio” mode to avoid unintentional sound. 2. Improvement has been done on the playback compatibility with USB devices. 3. Navigation performance has been improved for browsing through Internet radio stations. 4.
PAGE 2
________________________________________________________________________________________ This product contains OSS components that are made available under the GNU GPL license version 2 and LGPL license version 2.1. Please locate your product's IFU on www.p4c.philips.com for legal terms and conditions. If you have comments / suggestions, please go to www.streamiumcafe.