Manual with important information

Operating time
XC8049, XC8047, XC8043 XC8045
Using the appliance with Turbo
power mode
Up to 28 minutes Up to 28 minutes
Using the appliance with Normal
power mode (Setting 2)
Up to 35 minutes Up to 35 minutes
Using the appliance with Eco
power mode (Setting 1)
Up to 70 minutes Up to 60 minutes
User interface signals and their meaning
Signal
Description of signal Meaning of signal
The signal '00' and the battery icon flash on the
display.
The battery is empty.
A number between '00'and '90' flashes on the
display.
The appliance is charging.
The number '100' lights up on the display. After a full charging cycle, this signal
appears to show that the
rechargeable battery is fully charged.
The battery symbol lights up on the display. The appliance is in standby mode
with a fully charged battery.
A number between '00' and '10' together with the
battery icon flash on the display.
The rechargeable battery of the
appliance is low.
The display shows a flashing square and the
orange filter cleaning icon also flashes.
It indicates the recommended time
to check and clean the filter (Fig. 8) to
ensure the best performance of the
appliance.
Error code 'E1' lights up on the display.
Note: When the appliance is charging on the
charging station, the E1 error code may look like
the number 13.
This indicates that the appliance has
been stored or charged at a
temperature below 5°C. Move the
appliance to a warmer room. Do not
store or charge the appliance at a
temperature below 5°C or above
40°C.
Error code 'E4' lights up on the display.
Note: When the appliance is charging on the
charging station, the E4 error code may look like
the designation h3
The roller brush in the 360° suction
nozzle or in the mini Turbo brush has
become blocked and cannot turn
freely. Switch off the appliance and
check the roller brush for
obstructions or entangled hairs.
11
English