User manual

56 Camera
To take photos using different exposure
values
At a time, 3 photos can be captured in different
exposue values.
1. In Capture mode, select EV bracket sel..
2. Take photos as described in Step 3 under
"Take photos".
3 photos are captured at a time. Thumbnails
appears on the screen.
3. Select a photo. Tap on to save selected
photos;
Tap on to send it via the MMS, E-mail,
or Bluetooth (see Step 2 under “"Take
photos" on page 52);
Tap on to cancel the selection;
Tap on to exit and continue
photographing.
Advanced light settings
• To select how to highlight different areas in a
photo, tap on Adv. settings > AE meter.
• To avoid the impacts on photos caused by
flickers from lighting sources, such as
fluorescent lamps, tap on Adv. settings >
Remove flicker. Select 50Hz if the AC power
supply is 220V, and 60Hz if 110V.
Color settings
• To remove the effects on colors by
surroundings, tap on White balance to select
the scenes similar to yours.
• To add effects, tap on Effects to select the
your options.
• To increase or decrease contrast, tap on Adv.
settings > Contrast.
• To make colors more or less pronounced, tap
on Adv. settings > Saturation.
• To sharpen or blur the borders between
objects, tap on Adv. settings > Sharpness.
Other settings
• Select image size and quality as needed.
Lower image quality may decrease the photo
clarity, but reduce the file size. Set your
desired value in Image size and Adv. settings >
Image quality.