MSDS

Material Safety Data Sheet

www.PHILLIPSmfg.com Version 1.2 Page 1 of 3 800.822.5055

gripSTIK

Spray Adhesive

Revised Date: 2/03/10

HMIS Symbol:

Health 2

Flammability 4

Reactivity 0

Section 1. Product and Company Identification

Product Name: Phillips gripSTIK

Web Adhesive Spray Company Name: Phillips Manufacturing Co.

Trade Mark: Phillips gripSTIK

Spray Adhesive Address: 4949 S. 30

Street

Chemical Name: Mixture packaged in Omaha NE, 68107

pressurized aerosol spray can Phone Number: (402) 339-3800

Section 2. Hazardous Ingredients

Components CAS-No. Percentage by wt. OSHA PEL ACGIH TLV Other Limits

2-Propane (Acetone) 67-64-1 10.0% - 30.0% 1000 ppm 500 ppm 750 ppm (STEL)

Liquefied Petroleum Gas 68476-86-8 15.0% - 40.0% Unknown 1000 ppm

Hexane 110-54-3 5.0% - 10.0% 50 ppm 50 ppm N/A

Cyclohexane 110-82-7 10.0% - 30.0% 300 ppm 300 ppm

Section 3. Hazards Identification

Potential Health Hazards

Routes of Exposure / Entry

Inhalation: Yes

Eyes/ Skin: Yes

Ingestion: Unlikely

Signs and Symptoms of Exposure

Acute and Chronic: High concentrations of vapors may irritate nose and throat and cause symptoms of

intoxication such as dizziness, nausea, headache, or indigestion. Direct spray or vapors will irritate and may harm eyes. Product may

cause irritation due to defatting of skin. Cause irritation, narcosis, and symptoms of intoxication.

Medical Conditions Generally Aggravated by Exposure

None Known

Chemical Listed as Carcinogen or Potential Carcinogen

National Toxicology Program: No

I.A.R.C. Monographs: No

OSHA: No

Emergency Overview

Keep from reach of children. Do not puncture, incinerate, or place aerosol product in compactors. Containers of this

material may be hazardous when emptied since containers retain product residues (vapor, liquid, and/or solid). All

hazard precautions given must be observed. Do not flame cut, braze or use welding torch. Intentional misuse by

deliberately concentrating and inhaling this product may be harmful or fatal.

PAGE 1
Material Safety Data Sheet gripSTIK® Spray Adhesive Revised Date: 2/03/10 HMIS Symbol: Health Flammability Reactivity 2 4 0 Section 1. Product and Company Identification ® Product Name: Phillips gripSTIK Web Adhesive Spray Trade Mark: Phillips gripSTIK® Spray Adhesive Chemical Name: Mixture packaged in pressurized aerosol spray can Company Name: Phillips Manufacturing Co. Address: 4949 S. 30th Street Omaha NE, 68107 Phone Number: (402) 339-3800 Section 2.
PAGE 2
Material Safety Data Sheet Section 4. Emergency and First Aid Measures Inhalation: Remove victim to fresh air. Apply artificial respiration if necessary. Get medical attention. Eyes: Flush eyes with water for at least 15 minutes. Get medical attention if irritation persists. Skin: Remove contaminated clothing and wash before re wearing. Wash skin with soap & water. Get medical attention if irritation persists. Ingestion: Do not induce vomiting unless directed by a physician.
PAGE 3
Material Safety Data Sheet Section 10. Stability and Reaction (cont.) Conditions to Avoid: Open Flames; Temp. > 120°F Hazardous Polymerization: Will not occur Conditions to Avoid: None Incompatability: Strong oxidizers Hazardous Decomposition Products: CO, CO2, Hydrocarbons Section 11. Disposal Considerations Waste Disposal Methods: Dispose of in accordance with local, state, and federal regulations. Section 12.