Specifications

DINGO (20 A)
Industrial Solar Charge Controller
www.phocos.com
Phocos North America
325 S Euclid Ave. Suite 101
Tucson, AZ 85719
USA
Tel. [phone]
Fax [phone]
• Works in 12, 24, 32, 36 or 48V systems
• Charge, load and diversion control in one unit
• Backup generator control feature
• 512 days of system data logging
www.phocos.com
Application Examples
• SCADA Systems
• RVs
• Solar Message Boards
• Chemical Injection Pumps
• Transportation
Robust
Informative
Hybrid Control
Programmable
• Up to 512 days of battery data storage
• Back-lit LCD display shows real time and 99-days of historical data
• User-programmable charge regime and low-voltage disconnect
• Powerful event control feature can be programmed for the load port
and/or a general purpose, voltage-only port
• Auto generator start feature ideal for backup diesel and fuel cell gensets
• Terminals can be congured as diversion load controllers for wind/hydro
charging inputs
• Operates at full charge and load current simultaneously up to +50C
• Fully protected against reverse battery and PV polarity
Fully programmable charge controller for
simple and complex applications.
Phocos’ DINGO charge controller has a negative
ground that makes it a great option to be used in
vehicles. Its communication interface uses the
MODBUS protocol, which has been tried and
tested in harsh environments.
The DINGO’s large memory allows data such as
charging Ah, load Ah, battery voltage range and
the daily state of charge for 512 days. The data of
the past 99 days can be accessed directly using
the LC display with LED backlighting.
Powerful. Intelligent. Robust.