USER MANUAL QUATTRO3 CONFERENCE SPEAKERPHONE MODEL 305
QUATTRO3 OVERVIEW 4 Microphone Array Dial Pad Volume Up L2 Function Volume Down L1 Function Power/Mute The Quattro3 (Q3) is a high-quality conference speakerphone that will turn any room into a professionally sounding conference room. It has an exceptionally large pickup and broadcasting range, yet is small in size and discrete in design. The Q3 utilizes multiple microphones, a uniquely designed speaker, and a powerful DSP to achieve commanding performance.
CONNECTING YOUR Q3 Daisy Chain Connectors Down (right) Connector Panel 3.5mm External Speaker/Microphone Interface Module/Dialer Ethernet Connector Mini USB DC Power Connector CONNECT TO A COMPUTER: This connection is for any session using your computer, such as Voice Over IP applications (Skype, Vidyo, etc.).
USING THE QUATTRO3 The Quattro3’s control panel has 5 buttons: • Power / Mute button (in the middle) – see details of operation below • Volume Up and Volume Down control panel • L1 - Increase microphone sensitivity • L2 - Decrease microphone sensitivity NOTE: Over sensitive microphone settings will cause distortion.
USING THE DIAL PAD DIALING: 1 Dial the desired number 2 Press OR to get a dial tone 1 Press 2 The screen will display the last dialed number 3 Either select to redial by pressing OR dial new number then PICKING UP A CALL: 1 Press when the LCD screen light turns on, displays “Incoming Call”, and you hear a ringtone HANGING UP A CALL: 1 Press at any point to end a call REDIAL: 1 You can redial the last number by pressing twice SPEED DIAL: 1 Press and hold any number on the keypad for 2 seconds MENU SCREE
DAISY CHAINING Satellite Unit 2 Satellite Unit 3 Interface Module DOWN Connect to next unit Master Unit (Unit 1) Interface Module UP DOWN Connector Panel Interface Module UP DOWN UP Daisy Chain Cable Every Quattro3 comes with the built-in ability to connect to other Quattro3s (up to 15 units). This feature enables you to provide coverage for larger spaces using a chain of Q3s. MAKING THE CONNECTION: Choose the unit you wish to act as the master unit.
WIRING SLOT Plastic arch is installed The Quattro3 was designed to conceal any cable connection below the unit. When connecting the Q3, you can choose to run its cables discretely through an opening in your table or more traditionally, on the table itself. The Q3 arrives from the factory with its wiring slot sealed by a plastic cover. This should be used for running the wires discretely under the table.
CONNECTION OPTIONS For more connection options, you can purchase different modules separately to add on to your Quattro3. To the right is a list of the different interface modules that can be installed in your Quattro3. Model 303 304 305 Connection Analog Audio, Smart Phones/Tablets Daisy Chain Power Kit SIP/IP Phone ACCESSING THE CONTROL PORTAL The online control portal will allow you to control and adjust all of your IP phone settings.
SPECIFICATIONS • UBS interface (mini B connector) • 3.
WARRANTY The following warranty statement is effective for all Phoenix Audio Technologies’ products as of October 1st, 2007: Phoenix Audio Technologies warrants that this product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer agrees, at its option, to repair or replace with a like new replacement any defective part(s) free of charge (except transportation charges) for a period of two years for all products.
