Datasheet

https://www.phoenixcontact.com/ch/products/1044738
02/14/2020Page4/7
Printed-circuit board connector-PC 6/ 3-ST-BUS-7,62-1044738
Technical data
Air clearances and creepage distances
Minimum clearance - inhomogeneous field (III/3) 8 mm
Minimum clearance - inhomogeneous field (III/2) 8 mm
Minimum clearance - inhomogeneous field (II/2) 5.5 mm
Minimum creepage distance value (III/3) 12.5 mm
Minimum creepage distance value (III/2) 5 mm
Minimum creepage distance value (II/2) 5 mm
Temperature cycles
Specification IEC 60998-2-3:2002-12
Test current (minimum cross section) 32 A DC
Temperature cycles 384
Mechanical tests (A)
Insertion strength per pos. approx. 13 N
Withdraw strength per pos. approx. 16 N
Polarization when inserted requirement >20 N Test passed
Contact holder in insert requirements >20 N Test passed
Durability tests (B)
Specification IEC 60512-9-1:2010-03
Contact resistance R
1
0.7 mΩ
Insertion/withdrawal cycles 25
Contact resistance R
2
0.7 mΩ
Impulse withstand voltage at sea level 9.8 kV
Power-frequency withstand voltage 4.26 kV
Climatic tests (D)
Specification ISO 6988:1985-02
Cold stress -40 °C/2 h
Thermal stress 100 °C/168 h
Corrosive stress
0.2 dm
3
SO
2
on 300 dm
3
/40 °C/1 cycle
Impulse withstand voltage at sea level 9.8 kV
Power-frequency withstand voltage 4.26 kV
Environmental and durability tests (E)
Specification IEC 61984:2008-10
Result, degree of protection, IP code Finger safety with IP20 test finger
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
Drawings