Datasheet

https://www.phoenixcontact.com/us/produkte/1408517
Nov 12, 20131/9
Contact insert-HC-COM- 4/2-EBUC-1408517
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
HEAVYCON crimp contact insert for compact plastic housing, socket version; 4-pos. + PE supply
circuit, 2-pos. control circuit

Key commercial data
package_quantity
2
GTIN
4046356618229
Technical data
General
Note
For crimp contacts CK4.0-ED.. (control circuit), CK1.6-ED...
(control circuit)
Connection method
Signal Crimp connection (Signal contacts)
Connection method
Power Crimp connection (power contacts)
Pollution degree
3
Surge voltage category
III
Number of positions
4+2+PE
No. of power contacts
4
No. of control contacts
2
Insertion/withdrawal cycles
≥ 500
Design
COM
Connection in acc. with standard
IEC / EN
Conductor cross section
Signal 0.14 mm² ... 2.5 mm² (control contacts)
Conductor cross section
Power 1.5 mm² ... 6 mm² (power contacts)
Connection cross section AWG
16 ... 10 (power contacts)
Connection cross section AWG
26 ... 14 (control contacts)
Stripping length of the individual wire
9 mm (1.5mm²-2.5mm² control circuit)
Stripping length of the individual wire
9.6 mm (4mm²-6mm² control circuit)
Stripping length of the individual wire
8 mm (Control circuit)
Stripping length of the individual wire
6 mm (2.5 mm² control circuit)
Assembly instructions
Maximum insulation diameter for power circuit
Ambient conditions
Ambient temperature (operation)
-40 °C ... 100 °C (including heating up of contacts)
Material data