Datasheet
https://www.phoenixcontact.com/gb/products/1424678
01/11/2019Page2/8
Bus system connector-SACC-M12MSB-2PL SH PB-1424678
Technical data
Ambient conditions
Degree of protection IP65
IP67
General
Rated current at 40°C 4 A
Rated voltage 60 V DC
48 V AC
Number of positions 2
Insulation resistance ≥ 100 MΩ
Coding B - inverse
Standards/regulations M12 connector IEC61076-2-101
Shock, vibration EN 50155:2001
Signal type/category PROFIBUS DP, 12 Mbps
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Push-in connection
Conductor cross section 0.14 mm² ... 0.75 mm² (without ferrule)
0.08 mm² ... 0.5 mm² (with ferrule)
0.14 mm² ... 0.75 mm² (solid)
Conductor cross section AWG 26 ... 18 (without ferrule)
28 ... 20 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
0.8 Nm (Connector with coupling sleeve)
3 Nm (Pressure nut with coupling sleeve)
Assembly instructions The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 V0
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material of grip body Zinc die-cast, nickel-plated
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR
Additional material specifications TPE-U (Clamping cage, weight: 1.1 g)
PA 6 (Actuation lever)
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24,
R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and
R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)