Datasheet
https://www.phoenixcontact.com/gb/products/1424678
01/11/2019Page3/8
Bus system connector-SACC-M12MSB-2PL SH PB-1424678
Technical data
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Standard designation Shock, vibration
Standards/regulations EN 50155:2001
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Schematic diagram
4 3
1 2
5
Pin assignment M12 male connector, 5-pos., B-
coded, male side
Functional drawing
3 Nm
13
16
0,8 Nm
16
1208445
1212597
0,14 - 0,75 mm²
Ø 4 - 8 mm
29
8
12
Slide the pressure nut and sleeve housing along the cable, strip the cable, shorten the shield,
strip the single wires, connect the wires, in the case of a straight sleeve housing gently twist the
wires together, stick the shielding foil around the shortened shield, in the case of a cable outside
diameter < 6 mm stick an additional shielding foil around the wire pack, screw the sleeve housing
to the plug insert, screw the pressure nut tight.
Dimensional drawing
Ø19
M12
ca.61
1316
M12 SPEEDCON plug, straight, shielded