Datasheet

https://www.phoenixcontact.com/gb/products/1424683
01/11/2019Page3/9
Connector-SACC-M12FSD-4PL SH PN-1424683
Technical data
Material
Standards/regulations
PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24,
R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and
R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Standard designation Shock, vibration
Standards/regulations EN 50155:2001
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Schematic diagram
Pin assignment M12 socket, 4-pos., D-coded,
female side
Functional drawing
0,8 Nm
16
1208445
1212597
3 Nm
16 13
Ø 4 - 8 mm
0,14 - 0,75 mm²
29
8
12
Slide the pressure nut and sleeve housing along the cable, strip the cable, shorten the shield,
strip the single wires, connect the wires, in the case of a straight sleeve housing gently twist the
wires together, stick the shielding foil around the shortened shield, in the case of a cable outside
diameter < 6 mm stick an additional shielding foil around the wire pack, screw the sleeve housing
to the plug insert, screw the pressure nut tight.