Datasheet

https://www.phoenixcontact.com/us/produkte/1584428
Nov 12, 20131/10
Contact insert-HC-D 40-I-CT-F-1584428
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in
the user's documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
HEAVYCON female insert, D40 series, 40-pos., crimp connection. PE connection using tension
sleeve technology.

Key commercial data
package_quantity
10
GTIN
4046356142687
Technical data
General
Note
For HC-D40 housing, crimp contacts CK1,6-ED (crimp contacts
not included in scope of supply)
Connection method
Crimp connection
Pollution degree
3
Surge voltage category
III
Constructional and testing regulations
DIN VDE 0627/86
Constructional and testing regulations
DIN VDE 0110/02.79
Constructional and testing regulations
DIN VDE 0110-1/04.97
Constructional and testing regulations
IEC 60664-1, DIN IEC 60512
Constructional and testing regulations
IEC 60352
Number of positions
40+PE
Insertion/withdrawal cycles
≥ 500
Design
B16
Connection in acc. with standard
IEC / EN
Conductor cross section
0.14 mm² ... 2.5 mm²
Connection cross section AWG
26 ... 14
Stripping length of the individual wire
8 mm
Stripping length of the individual wire
6 mm (2.5 mm²)
Assembly instructions
- Use of HC-CST (1676857) coding pins and HC-CBU (1676860)
coding sockets has been prescribed.
Connection
Connectors may be plugged in only when there is no load/voltage.
Ambient conditions
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Material data